AOZ1300
Part | Datasheet |
---|---|
![]() |
AOZ1300AI (pdf) |
PDF Datasheet Preview |
---|
AOZ1300 Programmable 4A Power Distribution Switch The AOZ1300 is a current-limited power distribution switch intended for applications that require circuit protection. The device operates from a 2.7V to 6.0V input supply and provides up to 4A load current. AOZ1300 offers robust fault protection features including over-current/short-circuit protection and thermal overload protection. The current limit is programmable with an external resistor. An open-drain fault indicator is provided to alert a system controller of thermal overload, overcurrent, and short-circuit events. A 24ms fault blanking time eliminates false alarms. The AOZ1300 employs internal soft-start circuitry to control inrush current due to highly capacitive loads associated with hot-plug events. An adjustable slew rate control pin provides additional slew rate control if needed. The AOZ1300 is available in SO-8 package. ● maximum on-resistance ● Docking stations ● Notebook PCs ● RAID systems ● Telecom and Server hot-plug ● USB Power Distribution ● Compact PCI adapter Cards C1 1uF R1 100kΩ AOZ1300 FAULT OFF ON SLEW C3 10nF ISET R2 70kΩ VOUT TO USB PORT C2 4.7uF Figure High Current USB Host Page 1 of 12 AOZ1300 Ordering Information Part Number AOZ1300AI AOZ1300AIL Temperature Range -40°C to +85°C -40°C to +85°C Package SO-8 SO-8 Environmental RoHS Compliant Green Product All AOS products are offered in packages with Pb-free plating and compliant to RoHS standards. Parts marked as Green Products with “L” suffix use reduced levels of Halogens, and are also RoHS compliant. Please visit for additional information. Pin Configuration IN 1 SLEW 2 GND 3 ISET 4 SO-8 Top View 8 OUT 7 IC 6 FLT 5 EN Pin Description Pin Number 1 2 Pin Name IN SLEW ISET Pin Function Switch Power Input. IN also supplies power to internal circuitry. Slew Rate Control Pin. Leaving this pin open results in a minimum output slew rate. Connect a capacitor from SLEW to GND to increase output slew rate. Ground. Current-Limit Setting Pin. Connect a resistor from ISET to GND to set the currentlimit. Enable Input. Pull EN high to enable the device. The part enters into low-power shutdown when EN is pulled low. Fault Indicator. FLT is an open-drain output. FLT is asserted low during over-current or thermal overload events. FLT is asserted after the fault blanking period. Internally Connected Pin. No external connection is allowed to this pin. Leave this pin floating. Switch Output Pin. Page 2 of 12 AOZ1300 Absolute Maximum Ratings Exceeding the Absolute Maximum ratings may damage the device. Parameter Rating IN, OUT, EN, FLT, ISET, SLEW to GND OUT Maximum Continuous Current Junction Temperature TJ Storage Temperature TS 6.5V 5A +150°C -65°C to +150°C Recommend Operating Ratings The device is not guaranteed to operate beyond the Maximum Operating Ratings. Parameter Rating Input Supply Voltage VIN Junction Temperature TJ SO-8 Thermal Resistance ΘJA 1 |
More datasheets: DM74AS1032AMX | DM74AS1032AN | M3476 SL002 | M3476 SL005 | M3476 SL001 | AT91FR40162-CI-T | AT91FR40162-CI | FJY4010R | G2-2A03-TT | G2-2A03-ST |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AOZ1300AI Datasheet file may be downloaded here without warranties.