ACS755SCB-200-PSF

ACS755SCB-200-PSF Datasheet


ACS755xCB-200

Part Datasheet
ACS755SCB-200-PSF ACS755SCB-200-PSF ACS755SCB-200-PSF (pdf)
PDF Datasheet Preview
ACS755xCB-200

Fully Integrated, Hall Effect-Based Linear Current Sensor IC with High Voltage Isolation and a Low-Resistance Current Conductor

Discontinued Product

These parts are no longer in production The device should not be purchased for new design applications. Samples are no longer available.

Date of status change May 4, 2009

Recommended Substitutions:

For existing customer transition, and for new customers or new applications, refer to the ACS756.

NOTE For detailed information on purchasing options, contact your local Allegro field applications engineer or sales representative.

ACS755xCB-200

Fully Integrated, Hall Effect-Based Linear Current Sensor IC with High Voltage Isolation and a Low-Resistance Current Conductor

Monolithic Hall IC for high reliability Single +5 V supply 3 kVRMS isolation voltage between terminals 4/5 and
pins 1/2/3 for up to 1 minute 35 kHz bandwidth Automotive temperature range End-of-line factory-trimmed for gain and offset Ultra-low power loss 100 uΩ internal conductor
resistance Ratiometric output from supply voltage Extremely stable output offset voltage Small package size, with easy mounting capability Output proportional to DC currents

Package 5 pin package leadform PSF

The Allegro ACS755 family of current sensor ICs provides economical and precise solutions for DC current sensing in industrial, automotive, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, power supplies, and overcurrent fault protection.

The device consists of a precision, low-offset linear Hall circuit with a copper conduction path located near the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy at the factory.

The output of the device will be valid when a current flows through the primary copper conduction path from terminal 4 to terminal 5, which is the path used for current sampling. The internal resistance of this conductive path is 100 uΩ typical, providing low power loss.

Continued on the next
4 IP+
1 VCC

ACS755

GND 2

VIOUT

CBYP µF

CF RF

VOUT

Application The ACS755 outputs an analog signal, VOUT that varies linearly with the unidirectional DC primary sampled
current, IP , within the range specified. CF is recommended for noise management, with values that depend on the application.

ACS755xCB-200

Fully Integrated, Hall Effect-Based Linear Current Sensor IC with High Voltage Isolation and a Low-Resistance Current Conductor

Description continued The thickness of the copper conductor allows survival of the device at up to 5x overcurrent conditions. The terminals of the conductive path are electrically isolated from the signal leads pins 1 through This allows the ACS755 family of sensor ICs to be used in applications requiring electrical isolation without the use of opto-
isolators or other costly isolation techniques.

The device is fully calibrated prior to shipment from the factory. The ACS75x family is lead Pb free. All leads are plated with 100% matte tin, and there is no Pb inside the package. The heavy gauge leadframe is made of oxygen-free copper.

Selection Guide

TOP °C

Primary

Sampled

Current, IP A

Sensitivity Sens Typ.
mV/A

Bandwidth kHz
More datasheets: LSR3700001001KR500 | LSR3700001501KR500 | LSR3700001801KR500 | LSR3700002201KR500 | DFR0256 | AK93C85AM | PT8A2542WEX | PT8A2541WE | PT8A2541WEX | PT8A2542WE


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ACS755SCB-200-PSF Datasheet file may be downloaded here without warranties.

Datasheet ID: ACS755SCB-200-PSF 516119