A5367CA-T

A5367CA-T Datasheet

A5367

Part	Datasheet
A5367CA-T	A5367CA-T (pdf)

Related Parts	Information
A5367CA	A5367CA

PDF Datasheet Preview
A5367 Ionization Smoke Detector with Interconnect and Timer Package 16-pin DIP suffix A : The A5367 is a low-current, BiCMOS circuit providing all of the required features for an ionization-type smoke detector. A networking capability allows as many as 125 units to be interconnected so that if any unit senses smoke all units will sound their alarm. In addition, special features are incorporated to facilitate alignment and test of the finished smoke detector. The device is Recognized by Underwriters Laboratories for use in smoke alarms that comply with Standard UL217 or UL268, per file #S2113. The internal oscillator and timing circuitry keep standby power to a minimum by powering down the device for seconds and sensing for smoke for only 10 ms. Every 24 on-off cycles, a check is made for a low battery condition. By substituting other types of sensors or a switch for the ionization detector, this device can be used in numerous other battery-operated safety/security applications. The A5367 is supplied in a low-cost 16-pin dual in-line plastic package DIP . It is rated for continuous operation over the temperature range of to 60°C. The Pb lead free version suffix has 100% matte tin leadframe plating. Not to scale 50 kΩ To / from other units Timer Mode 200 kΩ 1 TIMER START 16 GUARD2 200 Ω 2 I/O 15 DETECT IN A5367 3 LOW-V SET 14 GUARD1 TIMER OUT SENSITIVITY SET 330 Ω 5 OSC CAP 6 VDD 7 TIMING RES 11 HORN2 10 HORN1 FEEDBACK 9 VSS 200 k Ω Push to Test A Use an external resistor to adjust sensitivity for a particular smoke chamber. B Select resistor to reduce sensitivity during Timer mode. C A resistor to VSS or VDD may be added to this pin to modify low battery voltage threshold. D Value of component will vary, based on the piezoelectric horn used. MΩ D 220 kΩ D A5367 Ionization Smoke Detector with Interconnect and Timer Selection Guide Part Number A5367CA-T A5367CA Pb-Free Yes Packing 25 pieces per tube Absolute Maximum Ratings*

PDF Datasheet Preview

A5367

Ionization Smoke Detector with Interconnect and Timer

Package 16-pin DIP suffix A :

The A5367 is a low-current, BiCMOS circuit providing all of the required features for an ionization-type smoke detector. A networking capability allows as many as 125 units to be interconnected so that if any unit senses smoke all units will sound their alarm. In addition, special features are incorporated to facilitate alignment and test of the finished smoke detector. The device is Recognized by Underwriters Laboratories for use in smoke alarms that comply with Standard UL217 or UL268, per file #S2113.

The internal oscillator and timing circuitry keep standby power to a minimum by powering down the device for seconds and sensing for smoke for only 10 ms. Every 24 on-off cycles, a check is made for a low battery condition. By substituting other types of sensors or a switch for the ionization detector, this device can be used in numerous other battery-operated safety/security applications.

The A5367 is supplied in a low-cost 16-pin dual in-line plastic package DIP . It is rated for continuous operation over the temperature range of to 60°C. The Pb lead free version suffix has 100% matte tin leadframe plating.

Not to scale
50 kΩ To / from other units

Timer Mode
200 kΩ 1

TIMER START
16 GUARD2
200 Ω 2 I/O
15 DETECT IN

A5367
3 LOW-V SET
14 GUARD1

TIMER OUT

SENSITIVITY SET
330 Ω 5

OSC CAP
6 VDD
7 TIMING RES
11 HORN2
10 HORN1

FEEDBACK
9 VSS
200 k Ω Push to Test

A Use an external resistor to adjust sensitivity for a particular smoke chamber.

B Select resistor to reduce sensitivity during Timer mode.

C A resistor to VSS or VDD may be added to this pin to modify low battery voltage threshold.

D Value of component will vary, based on the piezoelectric horn used.

MΩ D
220 kΩ D

A5367

Ionization Smoke Detector with Interconnect and Timer

Selection Guide Part Number

A5367CA-T A5367CA

Pb-Free Yes

Packing 25 pieces per tube

Absolute Maximum Ratings*

More datasheets: B43699A5226Q9 | B43699A5156Q7 | B43699A5106Q7 | B43699A5226Q7 | B43699A5336Q7 | B43699A5476Q7 | M2496 SL001 | M2496 SL005 | M2496 SL002 | CL-963-1W-C01-TS

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived A5367CA-T Datasheet file may be downloaded here without warranties.

Datasheet ID: A5367CA-T 516044