96FD25-S160-INB

96FD25-S160-INB Datasheet


Part Datasheet
96FD25-S160-INB 96FD25-S160-INB 96FD25-S160-INB (pdf)
Related Parts Information
96FD25-S480-INB 96FD25-S480-INB 96FD25-S480-INB
96FD18-S240-INB 96FD18-S240-INB 96FD18-S240-INB
96FD25-S600-INB 96FD25-S600-INB 96FD25-S600-INB
96FD25-S80-INB 96FD25-S80-INB 96FD25-S80-INB
96FD25-S240-INB 96FD25-S240-INB 96FD25-S240-INB
PDF Datasheet Preview
Solid-State Drive DC S3500 Series

Product Specification

Capacity − 2.5-inch 80/120/160/240/300/480/600/800 GB − 1.8-inch 80/240/400/800 GB

Components − 20nm NAND Flash Memory − Multi-Level Cell MLC

Form Factor and 1.8-inch Read and Write IOPS1,2 Full LBA Range,
3Gb/s and 1.5Gb/s interface rates − ATA8-ACS2 includes SCT Smart Command

Transport and device statistics log support − Enhanced SMART ATA feature set − Native Command Queuing NCQ command set − Data set management Trim command Compatibility − Windows 7 and Windows 8 − Windows Server 2012 − Windows Server 2008 Enterprise 32/64bit SP2 − Windows Server 2008 R2 SP1 − Windows Server 2003 Enterprise R2 64bit SP2 − Red Hat Enterprise Linux* − SUSE* Linux Enterprise Server 10, 11 SP1 − CentOS 64bit − SSD Toolbox with SSD Optimizer Product Ecological Compliance − RoHS*

Power Management − inch 5 V or 12 V SATA Supply Rail7 − inch V SATA Supply Rail − SATA Interface Power Management − OS-aware hot plug/removal − Enhanced power-loss data protection

Power − Active Up to W TYP − Idle 650 mW8

Weight − 2.5-inch 80-240 GB 70 grams ± 2 grams − 2.5-inch 300-800 GB 72 grams ± 2 grams − 1.8-inch 80 GB 35 grams ± 2 grams − 1.8-inch 240-800 GB 37 grams ± 2 grams

Temperature − Operating 0° C to 70° C − Non-Operating9 -55° C to 95° C − Temperature monitoring and logging − Thermal throttling

Shock operating and non-operating 1,000 G/0.5 msec

Vibration − Operating GRMS 5-700 Hz − Non-Operating GRMS 5-800 Hz

Altitude simulated
− Operating -1,000 to 10,000ft
− Non-Operating -1,000 to 40,000ft

Reliability
− Uncorrectable Bit Error Rate UBER :
− 1 sector per 1017 bits read
− Mean Time Between Failures MTBF :
2,000,000 hours
− End-to-End data protection

Endurance Rating10:
− 80 GB 45 TBW
120 GB 70 TBW
− 160 GB 100 TBW 240 GB 140 TBW
− 300 GB 170 TBW 400 GB 225 TBW
− 480 GB 275 TBW 600 GB 330 TBW
− 800 GB 450 TBW

Certifications and Declarations
− UL*, CE*, C-Tick*, BSMI*, KCC*, Microsoft* WHCK,

VCCI*, SATA-IO

Performance values vary by capacity and form factor Performance specifications apply to both compressible and incompressible data 4 KB = 4,096 bytes 8 KB = 8,192 bytes MB/s = 1,000,000 bytes/second. Based on Random 4KB QD=1 workload, measured as the time taken for percentile of commands to finish the round-trip from host to drive
and back to host Measurement taken once the workload has reached steady state but including all background activities required for normal operation and data
reliability Defaults to 12V, if both 12V and 5V are present Based on 5V supply Please contact your Intel representative for details on the non-operating temperature range Based on JESD218 standard

April 2013 Order Number 328860-001US

Solid-State Drive DC S3500
Ordering Information
Contact your local Intel sales representative for ordering information.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death. SHOULD YOU PURCHASE OR USE INTEL'S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT LIABILITY, PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS.

Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information.

The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800-548-4725, or go to:

Low Halogen applies only to brominated and chlorinated flame retardants BFRs/CFRs and PVC in the final product. Intel components as well as purchased components on the finished assembly meet JS-709 requirements, and the PCB/substrate meet IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the environment.

Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries.
*Other names and brands may be claimed as the property of others.

Copyright 2013 Intel Corporation. All rights reserved.

Product Specification 2

April 2013 Order Number 328860-001US

Solid-State Drive DC S3500

Contents

Terms and Acronyms

Overview

Product Specifications

Capacity 6 Electrical Characteristics 8 Environmental 10 Product Regulatory 11 Temperature 12 Power Loss Capacitor Test 12 Hot Plug Support 12

Mechanical Information

Pin and Signal
2.5-inch Form Factor Pin 15 1.8-inch Form Factor Pin 15 Connector Pin Signal Definitions 16 Power Pin Signal Definitions 16

Supported Command Sets

ATA General Feature Command Set 18 Power Management Command Set 18 Security Mode Feature 18 SMART Command Set 19 Device 24 SMART Command Transport 25 Data Set Management Command 25 Host Protected Area Command Set 25 48-Bit Address Command 25 General Purpose Log Command 25 Native Command Queuing 26 Software Settings 26

Certifications and Declarations

References

Appendix A IDENTIFY DEVICE Command Data

Order Number 328860-001US

Date April 2013

Initial release.

Terms and Acronyms

Solid-State Drive DC S3500

Term

Definition

ATA CRC DAS DMA ECC EXT FPDMA

Gb HDD HET KB I/O IOPS ISO LBA MB MLC MTBF NCQ NOP PB PCB PIO RDT RMS SATA SCT

SMART

SSD TB TYP UBER

Advanced Technology Attachment Cyclic Redundancy Check Device Activity Signal Direct Memory Access Error Correction Code Extended First Party Direct Memory Access Gigabyte Note The total usable capacity of the SSD may be less than the total physical capacity because a small portion of the capacity is used for NAND flash management and maintenance purposes. Gigabit Hard Disk Drive High Endurance Technology Kilobyte Input/Output Input/Output Operations Per Second International Standards Organization Logical Block Address Megabyte 1,000,000 bytes Multi-level Cell Mean Time Between Failures Native Command Queuing No Operation Petabyte Printed Circuit Board Programmed Input/Output Reliability Demonstration Test Root Mean Square Serial Advanced Technology Attachment SMART Command Transport Self-Monitoring, Analysis and Reporting Technology An open standard for developing hard drives and software systems that automatically monitors the health of a drive and reports potential problems. Solid-State Drive Terabyte Typical Uncorrectable Bit Error Rate

Product Specification 4

April 2013 Order Number 328860-001US
Intel SSD DC S3500 supports the following standard SCT actions − Write Same DC S3500 implements this action code as described in the ATA specification − Error Recovery Control DC S3500 accepts this action code, and will store and return error-recovery time limit values − Feature Control - DC S3500 supports feature code 0001h write cache feature code 0002h write cache reordering , and feature code 0003h time interval for temperature logging . It also supports D000h Power Safe Write Cache capacitor test interval , D001h read/write power governor mode , D002h read thermal governor mode , D003h read power governor burst power , D004h read power governor average power − Data table command - DC S3500 supports data table command as specified in ATA8-ACS2. This will read out temperature logging information in table ID 0002h − Read Status Support - DC S3500 supports read status log

Data Set Management Command Set

Intel SSD DC S3500 supports the Data Set Management command set Trim attribute, which consists of:
− DATA SET MANAGEMENT

Host Protected Area Command Set

Intel SSD DC S3500 supports the Host Protected Area command set, which consists of − READ NATIVE MAX ADDRESS − SET MAX ADDRESS − READ NATIVE MAX ADDRESS EXT − SET MAX ADDRESS EXT

Intel SSD DC S3500 also supports the following optional commands − SET MAX SET PASSWORD − SET MAX LOCK − SET MAX FREEZE LOCK − SET MAX UNLOCK
48-Bit Address Command Set

Intel SSD DC S3500 supports the 48-bit Address command set, which consists of − FLUSH CACHE EXT − READ DMA EXT − READ NATIVE MAX ADDRESS EXT − READ SECTOR S EXT − READ VERIFY SECTOR S EXT − SET MAX ADDRESS EXT − WRITE DMA EXT − WRITE MULTIPLE EXT − WRITE SECTOR S EXT − WRITE MULTIPLE FUA EXT − WRITE DMA FUA EXT

General Purpose Log Command Set

Intel SSD DC S3500 supports the General Purpose Log command set, which consists of − READ LOG EXT − WRITE LOG EXT

April 2013 Order Number 328860-001US

Product Specification 25

Solid-State Drive DC S3500

Native Command Queuing

Intel SSD DC S3500 supports the Native Command Queuing NCQ command set, which includes:
− READ FPDMA QUEUED − WRITE FPDMA QUEUED

Note With a maximum Queue Depth set to

Software Settings Preservation

Intel SSD DC S3500 supports the SET FEATURES parameter to enable/disable the preservation of software settings.

Product Specification 26

April 2013 Order Number 328860-001US

Solid-State Drive DC S3500

Certifications and Declarations

Table 21 describes the Device Certifications supported by the Intel SSD DC S3500.

Table

Device Certifications and Declarations

Certification

CE Compliant UL Recognized

Low Voltage DIRECTIVE 2006/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 12 December 2006, and EMC Directive 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December

Underwriters Laboratories, Inc. Bi-National Component Recognition UL 60950-1, 2nd Edition, 2007-03-27 Information Technology Equipment - Safety - Part 1 General Requirements CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03 Information Technology Equipment - Safety - Part 1 General Requirements

C-Tick Compliant

Compliance with the Australia/New Zealand Standard AS/NZS3548 and Electromagnetic Compatibility EMC Framework requirements of the Australian Communication Authority ACA .

BSMI Compliant

Compliance to the Taiwan EMC standard CNS 13438 Information technology equipment - Radio disturbance Characteristics - limits and methods of measurement, as amended on June 1, 2006, is harmonized with CISPR 22:

Compliance with paragraph 1 of Article 11 of the Electromagnetic Compatibility Control Regulation and meets the Electromagnetic Compatibility EMC Framework requirements of the Radio Research Laboratory RRL Ministry of Information and Communication Republic of Korea.

VCCI

Voluntary Control Council for Interface to cope with disturbance problems caused by personal computers or facsimile.

Restriction of Hazardous Substance Directive

WEEE

Directive on Waste Electrical and Electronic Equipment
More datasheets: 305620000006000 | 315610050500871 | 315620050116871 | 315610050210871 | TJM220605 | 96FD25-S480-INB | 96FD18-S240-INB | 96FD25-S600-INB | 96FD25-S80-INB | 96FD25-S240-INB


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 96FD25-S160-INB Datasheet file may be downloaded here without warranties.

Datasheet ID: 96FD25-S160-INB 515754