1142
1142 Datasheet
PRODUCT ID 1142
| Part | Datasheet |
|---|---|
1142 |
1142 (pdf) |
| PDF Datasheet Preview |
|---|
| Standard Size - High Torque - Metal Gear Servo PRODUCT ID 1142 This high-torque standard servo now comes in a metal-gear flavor, for extra-high torque 10 kg*cm! and reliability! It can rotate at least 120 degrees 60 in each direction with a classic 1.5-2.5ms pulse, but if you can extend your pulses it can go up to about 170 degrees - it varies a bit servo-to-servo. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box. Comes with a bunch of plastic horns, as shown. We now carry the Tower-Pro MG995, they are very nice, high quality servos, excellent for use in robotics. To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE see here for an example sketch Position "0" 1.5ms pulse is middle, "90" ~2ms pulse is all the way to the right, "-90" ~1ms pulse is all the way to the left. 2/23/2015 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 1142 Datasheet file may be downloaded here without warranties.