1058

1058 Datasheet

PRODUCT ID 1058

Part	Datasheet
1058	1058 (pdf)

PDF Datasheet Preview
Cross Laser Diode - 5mW 650nm Red PRODUCT ID 1058 You have some frickin' sharks at your lair, and you're thinking "it would be really great if I could attach some lasers to them" and then you see these little laser diode modules what great timing! These encapsulated laser diodes are Class IIIa 5mW, with a 650nm red wavelength. They can be driven from 2.8V to 5.2V so they're great for your embedded electronics project. This particular module has a lens attached that will turn the dot into a cross. This makes it particularly good for laser-vision guidance, targeting, and more! Simply connect power to the red and black wires and you will be lasing in no time. The cross has a beam spread of approximately 60° in both directions. So from a distance of 5cm, the cross is 5cm tall and 5cm wide. The cross ends have a sharp cutoff so the shape is very clearly defined. Please note this is not a laser pointer. It's a diode with integrated driver. You still need a 3 to 5VDC power supply. These diodes are 5mW output, and have a safety label marked on them. For more information on laser safety and ratings check out the Wikipedia page 10/5/2015 Technical Details Weight 11.85g Diameter 10.11mm Length 32.82mm Wire length 100mm 650nm wavelength - 5.2V DC voltage input 25mA max current draw Operating temperature -10°C to 40°C;

PDF Datasheet Preview

Cross Laser Diode - 5mW 650nm Red

PRODUCT ID 1058

You have some frickin' sharks at your lair, and you're thinking "it would be really great if I could attach some lasers to them" and then you see these little laser diode modules what great timing! These encapsulated laser diodes are Class IIIa 5mW, with a 650nm red wavelength. They can be driven from 2.8V to 5.2V so they're great for your embedded electronics project.

This particular module has a lens attached that will turn the dot into a cross. This makes it particularly good for laser-vision guidance, targeting, and more! Simply connect power to the red and black wires and you will be lasing in no time.

The cross has a beam spread of approximately 60° in both directions. So from a distance of 5cm, the cross is 5cm tall and 5cm wide. The cross ends have a sharp cutoff so the shape is very clearly defined.

Please note this is not a laser pointer. It's a diode with integrated driver. You still need a 3 to 5VDC power supply. These diodes are 5mW output, and have a safety label marked on them. For more information on laser safety and ratings check out the Wikipedia page
10/5/2015

Technical Details

Weight 11.85g Diameter 10.11mm Length 32.82mm Wire length 100mm 650nm wavelength - 5.2V DC voltage input 25mA max current draw Operating temperature -10°C to 40°C;

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 1058 Datasheet file may be downloaded here without warranties.

1058

1058 Datasheet

Datasheet ID: 1058 522868