918
918 Datasheet
PRODUCT ID 918
| Part | Datasheet |
|---|---|
918 |
918 (pdf) |
| PDF Datasheet Preview |
|---|
| Small Reduction Stepper Motor - 12VDC 32Step 1/16 Gearing PRODUCT ID 918 The gearing has a few side effects which are important to note. First, you can turn the stepper by hand but not as smoothly as an un-geared stepper. It also means you shouldn't use interleaved or micro-stepping to control or it will take forever to turn. Instead use single or double stepping. The torque is fairly high but its slower than un-geared steppers - we maxed out at about 80 RPM when powering with 12VDC and about 50 RPM on 9VDC. To use with the Adafruit Motor Shield, connect red to ground middle , orange and pink to one motor port say M1 and blue and yellow to the other motor port say M2 . So in order, thats orange - pink - red - blue - yellow. Then just use the example code that comes with the Adafruit Motor Shield library and set the constructor to Adafruit_StepperMotor *myMotor = AFMS.getStepper 513,motornum and the speed at 5 RPM by calling motor->setSpeed 5 . Otherwise, you can also wire it up with some transistors and use the Arduino Stepper library 10/5/2015 Technical Details |
| More datasheets: 103100 | 102100 | 101075 | 1545.42.38 | 1555.42.38 | 1545.48.44 | 1555.48.44 | 1545.36.33 | ELT-316USOWA/S530-A4 | B88069X3930T103 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 918 Datasheet file may be downloaded here without warranties.