914 914 Datasheet

PRODUCT ID 914

Part	Datasheet
914	914 (pdf)

PDF Datasheet Preview
Adafruit Assembled Pi Cobbler Breakout + Cable for Raspberry Pi - Model B PRODUCT ID 914 • Description The Pi Cobbler mini kit comes with a fully assembled PCB with socket and headers as well as a 26 pin ribbon cable No soldering required! The cable plugs between the Pi computer and the Cobbler breakout. The Cobbler can plug into any solderless breadboard or even a prototyping board like the PermaProto . The Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it. The Adafruit Pi Cobbler is compatible with Model A and Model B both versions 1 and 2 of the Raspberry Pi Computer - for version 2 computers, note that the GPIO #21 has been replaced with GPIO #27 and that the I2C pins are now I2C port #1 instead of All other pins are the same. This Cobbler is not compatible with the Model B+ unless you have a GPIO downgrade cable Please note, this kit only contains a 26 pin ribbon cable in slimming Adafruit Black and assembled Cobbler. The Raspberry Pi, breadboard, breadboarding wires, cables, case, power supply, and other components are not included! We do stock many of those items in the shop, so check those out as well! What is the Raspberry ? A low-cost ARM GNU/Linux box. The Raspberry is a single-board computer developed in the UK by the Raspberry Pi Foundation with the intention of stimulating the teaching of basic computer science in schools. The design is based on a Broadcom BCM2835 system on a chip SoC , which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and 256 megabytes of RAM. The design does not include a built-in hard disk or solidstate drive, instead relying on an SD card for booting and long-term storage. The Foundation plans to support Fedora Linux as the initial system software package/distribution, with support for Debian and Arch Linux as well - Wikipedia. Raspberry is a trademark of the Raspberry Pi Foundation. • Technical Details Engineered in NYC Adafruit

PDF Datasheet Preview

Adafruit Assembled Pi Cobbler Breakout + Cable for Raspberry Pi - Model B

PRODUCT ID 914
• Description

The Pi Cobbler mini kit comes with a fully assembled PCB with socket and headers as well as a 26 pin ribbon cable No soldering required! The cable plugs between the Pi computer and the Cobbler breakout. The Cobbler can plug into any solderless breadboard or even a prototyping board like the PermaProto . The Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it. The Adafruit Pi Cobbler is compatible with Model A and Model B both versions 1 and 2 of the Raspberry Pi Computer - for version 2 computers, note that the GPIO #21 has been replaced with GPIO #27 and that the I2C pins are now I2C port #1 instead of All other pins are the same. This Cobbler is not compatible with the Model B+ unless you have a GPIO downgrade cable Please note, this kit only contains a 26 pin ribbon cable in slimming Adafruit Black and assembled Cobbler. The Raspberry Pi, breadboard, breadboarding wires, cables, case, power supply, and other components are not included! We do stock many of those items in the shop, so check those out as well! What is the Raspberry ? A low-cost ARM GNU/Linux box. The Raspberry is a single-board computer developed in the UK by the Raspberry Pi Foundation with the intention of stimulating the teaching of basic computer science in schools. The design is based on a Broadcom BCM2835 system on a chip SoC , which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and 256 megabytes of RAM. The design does not include a built-in hard disk or solidstate drive, instead relying on an SD card for booting and long-term storage. The Foundation plans to support Fedora Linux as the initial system software package/distribution, with support for Debian and Arch Linux as well - Wikipedia.

Raspberry is a trademark of the Raspberry Pi Foundation.
• Technical Details

Engineered in NYC Adafruit

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 914 Datasheet file may be downloaded here without warranties.

914

914 Datasheet

Datasheet ID: 914 515064