814 814 Datasheet

PRODUCT ID 814

Part	Datasheet
814	814 (pdf)

PDF Datasheet Preview
Miniature WiFi 802.11b/g/n Module For Raspberry Pi and more PRODUCT ID 814 Make your Internet of Things device cable-free by adding WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but high-reliability wireless link. We tried half a dozen modules to find one that works well with the Pi and Bone without the need of recompiling any kernels its supported by the Bone's Angstrom/Debian installation that comes with each Bone as well as Raspbian and just about any other modern Pi operating system. You'll have wireless Internet in 10 minutes! Works great with 802.11b/g/n networks. If using with a Beagle Bone Because of the high power required by WiFi, a 5V 2A power adapter is required to power both the Bone and WiFi. Flaky behavior and crashes may result if this is not followed! We have a tutorial for using this module with the Beagle Bone! If using with a Raspberry Pi The latest Raspbian distributions support this module out-of-the-box. Check out our detailed tutorial for how to set up WiFi networking on the Pi If you have a model B you may find that you need to have a powered hub to use this adapter, so if you're having power flakiness with your Pi, try a hub! Please note These are good for home/office usage with a Raspberry Pi when the router is nearby. For installation projects or large-scale distribution, we strongly recommend upgrading to this stick with a larger antenna - especially if you plan on putting the Pi behind something or inside an enclosure/wall/box/sign/etc! The WiFi module may look slightly different than above, but all modules shipped contain the same chipset and have equivalent performance, the only difference is the plastic shell and any printing. We have requested to minimize packaging and now ship without a CD since all modern computers have support built in. If you need drivers, see the Technical Details tab 11/12/2015 Technical Details RTl8192/8188CUS Chipset Sticks out 8mm beyond USB port Weight 2.17g Wireless Standards IEEE 802.11n draft , IEEE 802.11g, IEEE 802.11b Host Interface High speed USB2.0/1.1 interface Data Rate 802.11n up to 150Mbps downlink and up to 150Mbps uplink , 802.11g 54 / 48 / 36 / 24 / 18/ 12 / 9 / 6 Mbps auto fallback, 802.11b 11 / / 2 / 1 Mbps auto fallback Frequency Band 2.4GHz ISM Industrial Scientific Medical Band Chipset Realtek RF Frequency 2412 ~ 2462 MHz North America , 2412 ~ 2472 MHz Europe , 2412 ~ 2484 MHz Japan Radio Channel 1 ~ 14 channels Universal Domain Selection Range Coverage Up to 3 times farther range than 802.11g Antenna Type Integrated Antenna Roaming Full mobility and seamless roaming from cell to cell RF Output Power 13 ~17 dBm Typical Modulation 11n BPSK, QPSK, 16QAM, 64QAM with OFDM, 11g BPSK, QPSK, 16QAM, 64QAM, OFDM, 11b DQPSK, DBPSK, DSSS, CCK Data Security 64/128-bit WEP Encryption WPA, WPA-PSK, WPA2, WPA2-PSK. TKIP/AES Network Auto-switch to use 802.11n or 802.11g or 802.11b mode Supports Ad-Hoc, Infrastructure WLAN network, Wireless roaming, Data rate auto fall-back under noisy environment or longer range distance, Site Survey with Profile function Configuration & Management Plug-and-Play setup and installation, Management Utility supports 2000 / XP/ Vista Media Access Control CSMA/CA with ACK LED Indicator Link/Active Blue Operating Temperature 0°C to 40°C Storage Temperature -20°C to 75°C Operating Humidity 10% ~ 90% Non Condensing Storage Humidity 5% ~ 95% Non Condensing Requirements Available USB port Download drivers shouldn't be necessary but in case from this site, look for the RTL8188CUS download table

PDF Datasheet Preview

Miniature WiFi 802.11b/g/n Module For Raspberry Pi and more

PRODUCT ID 814

Make your Internet of Things device cable-free by adding WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but high-reliability wireless link. We tried half a dozen modules to find one that works well with the Pi and Bone without the need of recompiling any kernels its supported by the Bone's Angstrom/Debian installation that comes with each Bone as well as Raspbian and just about any other modern Pi operating system. You'll have wireless Internet in 10 minutes! Works great with 802.11b/g/n networks.

If using with a Beagle Bone Because of the high power required by WiFi, a 5V 2A power adapter is required to power both the Bone and WiFi. Flaky behavior and crashes may result if this is not followed! We have a tutorial for using this module with the Beagle Bone!

If using with a Raspberry Pi The latest Raspbian distributions support this module out-of-the-box. Check out our detailed tutorial for how to set up WiFi networking on the Pi If you have a model B you may find that you need to have a powered hub to use this adapter, so if you're having power flakiness with your Pi, try a hub!

Please note These are good for home/office usage with a Raspberry Pi when the router is nearby. For installation projects or large-scale distribution, we strongly recommend upgrading to this stick with a larger antenna - especially if you plan on putting the Pi behind something or inside an enclosure/wall/box/sign/etc!

The WiFi module may look slightly different than above, but all modules shipped contain the same chipset and have equivalent performance, the only difference is the plastic shell and any printing. We have requested to minimize packaging and now ship without a CD since all modern computers have support built in. If you need drivers, see the Technical Details tab
11/12/2015

Technical Details

RTl8192/8188CUS Chipset Sticks out 8mm beyond USB port Weight 2.17g

Wireless Standards IEEE 802.11n draft , IEEE 802.11g, IEEE 802.11b Host Interface High speed USB2.0/1.1 interface Data Rate 802.11n up to 150Mbps downlink and up to 150Mbps uplink , 802.11g 54 / 48 / 36 / 24 / 18/ 12 / 9 / 6 Mbps auto fallback, 802.11b 11 / / 2 / 1 Mbps auto fallback Frequency Band 2.4GHz ISM Industrial Scientific Medical Band Chipset Realtek RF Frequency 2412 ~ 2462 MHz North America , 2412 ~ 2472 MHz Europe , 2412 ~ 2484 MHz Japan Radio Channel 1 ~ 14 channels Universal Domain Selection Range Coverage Up to 3 times farther range than 802.11g Antenna Type Integrated Antenna Roaming Full mobility and seamless roaming from cell to cell RF Output Power 13 ~17 dBm Typical Modulation 11n BPSK, QPSK, 16QAM, 64QAM with OFDM, 11g BPSK, QPSK, 16QAM, 64QAM, OFDM, 11b DQPSK, DBPSK, DSSS, CCK Data Security 64/128-bit WEP Encryption WPA, WPA-PSK, WPA2, WPA2-PSK. TKIP/AES Network Auto-switch to use 802.11n or 802.11g or 802.11b mode Supports Ad-Hoc, Infrastructure WLAN network, Wireless roaming, Data rate auto fall-back under noisy environment or longer range distance, Site Survey with Profile function Configuration & Management Plug-and-Play setup and installation, Management Utility supports 2000 / XP/ Vista Media Access Control CSMA/CA with ACK LED Indicator Link/Active Blue Operating Temperature 0°C to 40°C Storage Temperature -20°C to 75°C Operating Humidity 10% ~ 90% Non Condensing Storage Humidity 5% ~ 95% Non Condensing Requirements Available USB port

Download drivers shouldn't be necessary but in case from this site, look for the RTL8188CUS download table

More datasheets: 1131/25 17 | N5030S 1 | N5030 1 | 1131/26 2501 | 1131/26 17 M12-.10 | C1131/28 1 | N5030L 17 | N5030L 1 | N1030 1 | 1131/31 M12-2202

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 814 Datasheet file may be downloaded here without warranties.

814

814 Datasheet

Datasheet ID: 814 514800