PRODUCT ID 3661
Part | Datasheet |
---|---|
![]() |
3661 (pdf) |
PDF Datasheet Preview |
---|
Adafruit MiniBoost 5V 100mA Charge Pump - AP3602A PRODUCT ID 3661 This adorable little board will come in very handy whenever you need a small amount of 5V power. It's the size of a linear regulator, but it's actually a Input 3V on one side, and get 5V at up to 100mA supply on the other. Perfect for use with projects with 2 or 3 Alkaline, or a single Lithium battery. For big projects, you may want one of our PowerBoost boards that can give you a honkin' of current. This booster uses a topology, which makes it very compact and low cost. But it isn't as efficient as a boost converter. always double the incoming voltage, and then regulate down. So yeah, not as efficient. So ideal for when you aren't counting coulombs or when your current draw isn't terribly high. You get one fully assembled breakout with an AP3602A and components, and a small bit of header. Give on the IN and ground pins. Then you'll have 5V on the OUT pin. The enable pin can be pulled low to disable the output. Technical Details Product Dimensions 15.0mm x 10.0mm x 3.0mm / x Product Weight 0.6g / 0.0oz |
More datasheets: SIL15C-05SADJ-H | SIL15C-05SADJ-V | SIL15C-12SADJ-H | KX0608 | KX0607 | KX0606 | CR0028 | CR0060 | A-PC2304-020028-1 | W2E143-AA15-01 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 3661 Datasheet file may be downloaded here without warranties.