3636

3636 Datasheet

PRODUCT ID 3636

Part	Datasheet
3636	3636 (pdf)

PDF Datasheet Preview
Adafruit NeoPixel LED Side Light Strip Black 60 LED PRODUCT ID 3636 Fancy new side light LED strips are a great alternative for folks who have loved and used Adafruit LED strips for a few years but want gorgeous, glowy light emitting at 90 degrees. They're very skinny so you can run them along a thin edge and curve them around shapes and corners. These look awesome for accent lighting, back lighting, edge lighting, etc! This is the 60 version of our Side Light strips. We also have 90 LED/m and 120 LED/m on black flex PCB. The strip is constructed of flexible black PCB material with weatherproof sheathing. You can cut this stuff pretty easily with wire cutters. There is a cut line halfway down the strip. Solder to the copper pads, and you're good to go! Of course, you can also connect strips together to make them longer, just watch how much current you need! These strips come in reels with a JST SM connector on each end. To wire up these strips we suggest picking up some JST SM plug and receptacle cables for the signal wires. For the power wires, you will also probably want a 2.1mm DC jack to wire in, so you can connect one of our 5V wall adapters to power it. Technical Details o Storage temperature +80°C o Operating temperature +60°C o Strip width 8mm o LED pitch 17mm

PDF Datasheet Preview

Adafruit NeoPixel LED Side Light Strip Black 60 LED

PRODUCT ID 3636

Fancy new side light LED strips are a great alternative for folks who have loved and used Adafruit LED strips for a few years but want gorgeous, glowy light emitting at 90 degrees. They're very skinny so you can run them along a thin edge and curve them around shapes and corners. These look awesome for accent lighting, back lighting, edge lighting, etc!

This is the 60 version of our Side Light strips. We also have 90 LED/m and 120 LED/m on black flex PCB. The strip is constructed of flexible black PCB material with weatherproof sheathing. You can cut this stuff pretty easily with wire cutters. There is a cut line halfway down the strip. Solder to the copper pads, and you're good to go! Of course, you can also connect strips together to make them longer, just watch how much current you need!

These strips come in reels with a JST SM connector on each end. To wire up these strips we suggest picking up some JST SM plug and receptacle cables for the signal wires. For the power wires, you will also probably want a 2.1mm DC jack to wire in, so you can connect one of our 5V wall adapters to power it.

Technical Details
o Storage temperature +80°C o Operating temperature +60°C o Strip width 8mm o LED pitch 17mm

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 3636 Datasheet file may be downloaded here without warranties.

3636

3636 Datasheet

Datasheet ID: 3636 513272