362

362 Datasheet


PRODUCT ID 362

Part Datasheet
362 362 362 (pdf)
PDF Datasheet Preview
WIRELESS / RFID / NFC

MiFare Classic 13.56MHz RFID/NFC Sticker - 1KB

PRODUCT ID 362

This is a blank MiFare Classic sticker - often used for inventory, identification but also found in other systems where a flexible, thin tag is desired. The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.

These can be read by almost any 13.56MHz RFID/NFC reader but make sure it can handle MiFare cards as there are a few other encoding standards like FeLica They are tested and work great with both our PN532 NFC/RFID breakout board and Adafruit NFC/RFID Shield for Arduino!

These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes. You can use our PN532 NFC/RFID breakout board or Adafruit NFC/RFID Shield for Arduino to read and write data to the EEPROM inside the tag. There is also a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed.

These use the S50 chipset, which used to be the 'classic' NFC chipset. In ~2014, the NFC forum decided not to support this chipset anymore, so newer phones do not support the MiFare classic. This only matters if you're trying to use this tag with a phone/tablet.
7/21/2015
More datasheets: 5973507502F | 5973207502F | 5973407507F | 5973007507F | 5973907507F | 18070 | PIN SP-1A | B88069X9230B502 | EA-QSB-010 | EA-QSB-110


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 362 Datasheet file may be downloaded here without warranties.

Datasheet ID: 362 513095