3606

3606 Datasheet

PRODUCT ID 3606

Part	Datasheet
3606	3606 (pdf)

PDF Datasheet Preview
Mongoose OS & Google IoT Core Pack w/ Adafruit Feather HUZZAH32 PRODUCT ID 3606 • Description In collaboration with Google and Mongoose OS, Adafruit's releasing an IoT Core Pack based around our Feather HUZZAH32! This kit includes a Adafruit Feather HUZZAH with ESP32 WiFi and some sensors and components to get you started on your IoT journey. Feather is a development board from Adafruit that, like its namesake, is thin, light and lets you fly. We designed Feather to be a new standard for portable microcontroller cores. This starter kit contains the Adafruit HUZZAH32 ESP32 Feather Board our take on an one' ESP32 WiFi development board with USB and battery charging. It's an ESP32 WiFi module with all the extras you need, ready to rock! At the Feather HUZZAH's heart is an ESP32 WiFi microcontroller clocked at 240 MHz and at 3.3V logic. The ESP32 is a perfect upgrade from the ESP8266 that has been so popular. In comparison, the ESP32 has way more GPIO, plenty of analog inputs, two analog outputs, multiple extra peripherals like a spare UART , two cores so you don't have to yield to the WiFi manager, much processor, etc. etc! We think that as the ESP32 gets traction, we'll see more people move to this chip exclusively, as it is so Mongoose is providing all documentation and setup support for this pack. For more information on how to get started with Mongoose, follow the link below: • And for more information on how to set up your Feather HUZZAH32, check out our learn guide. This kit includes: o 1x Adafruit HUZZAH32 ESP32 Feather Board o 1x Micro Servo o 1x PIR motion Sensor o 1x USB Cable A/Micro B o 1x Fast Vibration Switch o 1x Magnetic Contact Switch door sensor o 1x Breadboard o 1x Premium Male/Male Jumper Wires 40 x 6" o 1x Magnetic Contact Switch door sensor o 1x DHT22 Sensor + Extras Component bag containing: o 3x 12mm Tactile Switches o 1x Breadboard Trim Potentiometer 10K o 1x Diffused 10mm Green LED o 1x Diffused 10mm Red LED o 5x 10K 5% 1/4W Resistor o 5x 560 Ohm 5% 1/4W Resistor o 1x Piezo Buzzer o 1x Photo Cell Light Sensor o 1x Diffused RGB LED o 1x SPDT Slide Switch

PDF Datasheet Preview

Mongoose OS & Google IoT Core Pack w/ Adafruit Feather HUZZAH32

PRODUCT ID 3606
• Description

In collaboration with Google and Mongoose OS, Adafruit's releasing an IoT Core Pack based around our Feather HUZZAH32! This kit includes a Adafruit Feather HUZZAH with ESP32 WiFi and some sensors and components to get you started on your IoT journey.

Feather is a development board from Adafruit that, like its namesake, is thin, light and lets you fly. We designed Feather to be a new standard for portable microcontroller cores.

This starter kit contains the Adafruit HUZZAH32 ESP32 Feather Board our take on an one' ESP32 WiFi development board with USB and battery charging. It's an ESP32 WiFi module with all the extras you need, ready to rock!

At the Feather HUZZAH's heart is an ESP32 WiFi microcontroller clocked at 240 MHz and at 3.3V logic. The ESP32 is a perfect upgrade from the ESP8266 that has been so popular. In comparison, the ESP32 has way more GPIO, plenty of analog inputs, two analog outputs, multiple extra peripherals like a spare UART , two cores so you don't have to yield to the WiFi manager, much processor, etc. etc! We think that as the ESP32 gets traction, we'll see more people move to this chip exclusively, as it is so

Mongoose is providing all documentation and setup support for this pack. For more information on how to get started with Mongoose, follow the link below:
• And for more information on how to set up your Feather HUZZAH32, check out our learn guide.

This kit includes:
o 1x Adafruit HUZZAH32 ESP32 Feather Board o 1x Micro Servo o 1x PIR motion Sensor o 1x USB Cable A/Micro B o 1x Fast Vibration Switch o 1x Magnetic Contact Switch door sensor o 1x Breadboard o 1x Premium Male/Male Jumper Wires 40 x 6"
o 1x Magnetic Contact Switch door sensor o 1x DHT22 Sensor + Extras

Component bag containing:
o 3x 12mm Tactile Switches o 1x Breadboard Trim Potentiometer 10K o 1x Diffused 10mm Green LED o 1x Diffused 10mm Red LED o 5x 10K 5% 1/4W Resistor o 5x 560 Ohm 5% 1/4W Resistor o 1x Piezo Buzzer o 1x Photo Cell Light Sensor o 1x Diffused RGB LED o 1x SPDT Slide Switch

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 3606 Datasheet file may be downloaded here without warranties.

3606

3606 Datasheet

Datasheet ID: 3606 513039