PRODUCT ID 3288
Part | Datasheet |
---|---|
![]() |
3288 (pdf) |
PDF Datasheet Preview |
---|
ModMyPi Pi Zero Case - Frost/Clear PRODUCT ID 3288 • Description Still searching for the Pi Zero enclosure that works for you? Try out this fully injection molded Raspberry Pi Zero case from ModMyPi! Designed to optimise protection whilst maintaining device useability, this Pi Zero case consists of a clip together construction with microSD card cover and embossed Raspberry Pi Foundation logo, which acts as a ventilation point for heat extraction. Each case features a top and bottom GPIO which can easily be removed using a sharp instrument, or left in situ if the GPIO is not required. There are also 2 x M3 mounting holes on the back of the case, so you can effortlessly mount your Pi Zero where it's required e.g. your belt/dog/table/wall, and two internal microSD card slots to store you spare OS images. Product features o Professional Fully Injection Molded Raspberry Pi Zero Case o 3 Part Construction Top, Base & Micro SD Card Cover o Removable Micro SD Card Cover o GPIO Slot Top & Bottom o Embossed Raspberry Pi Foundation Logo o Embossed Port Labels MicroSD, Camera, USB, Power, HDMI o Raspberry Pi Zero Clips In No Screws o Power LED Hole o M3 Bolt Mount for Attaching to Belts for Wearables or Walls for Wallables o 2 x Internal Clip In Micro SD Card Holders o Drop Resistant Raspberry Pi Zero not included! • Technical Details For product support, please visit the ModMyPi forum. Product Dimensions 74.0mm x 39.0mm x 13.0mm / x Product Weight 16.8g / 0.6oz Engineered in NYC Adafruit |
More datasheets: 4205-011 | DM74S30N | UE86-3G6620-20361 | UE86-3G6620-30361 | UE86-3G6620-10361 | UE86-3G6620-00361 | FFPF15U40STU | HLMP-CE13-24CDD | 67-21-YSC-C2U2AABPE-2T8-AM | 18046USA |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 3288 Datasheet file may be downloaded here without warranties.