3283

3283 Datasheet

PRODUCT ID 3283

Part	Datasheet
3283	3283 (pdf)

PDF Datasheet Preview
Red Bear IoT pHAT for Raspberry Pi - WiFi + BTLE PRODUCT ID 3283 • Description So you've got your Pi 3 with its built-in wireless LAN and Bluetooth, but what about your Pi Zero? Say hello to the IoT pHAT from Red Bear! This Zero-size board provides WiFi 802.11bgn / 2.4GHz and Bluetooth v4.1 / BTLE connectivity direct from the GPIO header. You don’t need to use a dongle plugged into the Pi Zero’s solitary data micro-USB port via a USB OTG adapter. Just snap it on top of a Raspberry Pi Zero or really, any Raspberry Pi with a 2x20 connector ! The IoT pHAT provides a neat and convenient way to add WiFi and Bluetooth connectivity to your Pi Zero, while freeing up the USB data port. Using the same wireless radio chip as the Pi 3 results in reliable signal strength and quality via an on-board or optional external antenna. As with other pHATs, it works with all of the 40-pin Raspberry Pi variants - 2/B+/A+/Zero - but using it with the Pi Zero makes for a super-tiny package. Features o AMPAK AP6212A Wireless Module Broadcom BCM43438 A1 chip inside • WiFi 802.11bgn / 2.4GHz • Bluetooth and BLE support o Single antenna for concurrent WiFi and Bluetooth operations • Onboard PCB antenna • External antenna connector • Antenna switch for extenal antenna o 32 Kbit 4 KByte EEPROM for DTOverlay configuration o 40-pin connector • WiFi SDIO v2.0 - up to 20 MHz clock rate • Bluetooth UART up to 4 Mbps o FCC/CE certified o Pre-soldered with 40-pin female header, no assembly required! Pi Zero not included! • Technical Details For technical inquiries, please visit Red Bear's support forum. If you think you have a faulty unit, kindly open a support ticket and Red Bear staffs will follow up with you. Product Dimensions 65.0mm x 30.0mm x 11.0mm / x Product Weight 10.5g / 0.4oz Engineered in NYC Adafruit

PDF Datasheet Preview

Red Bear IoT pHAT for Raspberry Pi - WiFi + BTLE

PRODUCT ID 3283
• Description

So you've got your Pi 3 with its built-in wireless LAN and Bluetooth, but what about your Pi Zero? Say hello to the IoT pHAT from Red Bear! This Zero-size board provides WiFi 802.11bgn / 2.4GHz and Bluetooth v4.1 / BTLE connectivity direct from the GPIO header. You don’t need to use a dongle plugged into the Pi Zero’s solitary data micro-USB port via a USB OTG adapter. Just snap it on top of a Raspberry Pi Zero or really, any Raspberry Pi with a 2x20 connector ! The IoT pHAT provides a neat and convenient way to add WiFi and Bluetooth connectivity to your Pi Zero, while freeing up the USB data port. Using the same wireless radio chip as the Pi 3 results in reliable signal strength and quality via an on-board or optional external antenna. As with other pHATs, it works with all of the 40-pin Raspberry Pi variants - 2/B+/A+/Zero - but using it with the Pi Zero makes for a super-tiny package.

Features o AMPAK AP6212A Wireless Module Broadcom BCM43438 A1 chip inside
• WiFi 802.11bgn / 2.4GHz
• Bluetooth and BLE support o Single antenna for concurrent WiFi and Bluetooth operations
• Onboard PCB antenna
• External antenna connector
• Antenna switch for extenal antenna o 32 Kbit 4 KByte EEPROM for DTOverlay configuration o 40-pin connector
• WiFi SDIO v2.0 - up to 20 MHz clock rate
• Bluetooth UART up to 4 Mbps o FCC/CE certified o Pre-soldered with 40-pin female header, no assembly required!

Pi Zero not included!
• Technical Details

For technical inquiries, please visit Red Bear's support forum. If you think you have a faulty unit, kindly open a support ticket and Red Bear staffs will follow up with you. Product Dimensions 65.0mm x 30.0mm x 11.0mm / x Product Weight 10.5g / 0.4oz

Engineered in NYC Adafruit

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 3283 Datasheet file may be downloaded here without warranties.

3283

3283 Datasheet

Datasheet ID: 3283 511763