3083
3083 Datasheet
PRODUCT ID 3083
| Part | Datasheet |
|---|---|
3083 |
3083 (pdf) |
| PDF Datasheet Preview |
|---|
| Aluminum Heat Sink for Raspberry Pi 3 - 14 x 14 x 8mm PRODUCT ID 3083 Looking for a nice way to cool down your Raspberry Pi 3? Check out this 14x14x8 Heat Sink! This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi but is best paired with a Raspberry Pi 3 since it can run a little hot. It comes with thermal adhesive already applied to the back making installation super easy. Clean the surface of the chip of any dust or grease then peel off the protective film and press the heat sink firmly onto the chip. You can use this heatsink with any of our injection molded Adafruit Pi Enclosures, but it may not work with other enclosures and most HATs will not fit on top with the heat sink installed. We don't have formal specs for this heat sink, but when we ran 'stress -c 4' on the Pi 3 to run all 4 CPUs, a heat-sink-less Pi quickly dropped down to GHz to maintain thermal equilibrium. With this heat sink installed, it could run at GHz so, approx 14% higher performance Note that you do not need a heatsink for the Pi 3, it will automatically adjust its speed to avoid overheating! It can also, of course, be used for other processors and chips Technical Details Product Dimensions 14.0mm x 13.8mm x 8.2mm / x Product Weight 1.8g/0.1oz Engineered in NYC Adafruit |
| More datasheets: MSA-3111-TR2G | MSA-3186-TR1G | MSA-3186-TR2G | SEN0149 | U479B-MFPG3Y | U479B-M | U479B-MFPY | U479B-MFPG3 | U479B-MFP | U479B-MY |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 3083 Datasheet file may be downloaded here without warranties.