2475

2475 Datasheet


PRODUCT ID 2475

Part Datasheet
2475 2475 2475 (pdf)
PDF Datasheet Preview
PLA/PHA bambooFill for 3D Printers 1.75mm Diameter - 600g

PRODUCT ID 2475
• Description

Having a 3D printer without filament is sort of like having a regular printer without paper or ink. And while a lot of printers come with some filament there's a good chance you've been printing up a storm and need something new. That's why we've started carrying a complete line of 3D printing filament in a variety of colors! This PLA/PHA bambooFill blend 1.75mm 600g spool from colorFabb is a great material for 3D printers. This amazing one of a kind filament will allow you to print with actual recycled bamboo at home! Your prints will look absolutely amazing and your 3d printer cave will smell like a woodshop! Tips Start out with a bit rougher layers, 0.27mm for 0.4mm nozzle this will ensure that you’re printing with a decent amount of material flow. This is important because it will make sure the material isn’t spending too much time in the hot-zone of the 3D printer, which will degrade the polymer. This filament has been tested successfully on a wide variety of printers, working well on both heated and non-heated build platforms. For those users printing on a cold build platform colorFabb advises applying blue painter's tape to the build area. For heated build platforms colorFabb used a temperature of 55-60°C which will keep the print sticking to the platform. It can be printed straight on glass or with a bit of gluestick applied to it. They've also printed it succesfully on kapton tape with the same temperature settings. Testing showed reliable results using the all metal hot-ends, such as the E3D and the Makerbot Replicator 2 hotend. Hotends which use a teflon isolator coupler can generate adhesion to the bamboo filament possibly leading to clogs and is there for not recommended for novice users yet.
• Technical Details

Please note PLA/PHA filament cannot be used with New Matter MOD-t 3D printers. o Advised 3D printing temperature 195-220°C o Advised 3D print speed 40 - 100 mm/s o Advised Heated bed if you have one, not strictly necessary 50-60° C o Diameter Tolerance ± 0.05mm o Glass Transition Temperature 55°C

Engineered in NYC Adafruit
More datasheets: AT27C4096-70PC | 383-2UYC/S400-A9 | 2N5769 | SDM10M45SD-7 | M3437 SL005 | M3437 SL001 | M3437 SL002 | CDBUR00340 | 2321137203 | EIR-EXTEND-C


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 2475 Datasheet file may be downloaded here without warranties.

Datasheet ID: 2475 509292