1565

1565 Datasheet

PRODUCT ID 1565

Part	Datasheet
1565	1565 (pdf)

PDF Datasheet Preview
USB Battery Pack for Raspberry Pi 4000mAh - 5V 1A PRODUCT ID 1565 • Description A medium-sized rechargeable battery pack for your Raspberry Pi or Arduino, or Propeller, or anything else that uses 5V! . This pack is intended for providing a lot of power to an iPhone, cell phone, tablet, etc but we found it does a really good job of powering other miniature computers and micro-controllers. If you want even more power, we have a 10,000mAh power pack with two USB ports that can provide up to 2A! We tested it with an iPhone 5 & 5s so we know it will charge those models. It isn't good for charging large tablets that need 2A charging current such as the iPad. Inside is a 4000mAh lithium ion battery, a charging circuit you charge it via the USB cable attached , and a boost converters that provides 5VDC up to 1 Amp via a USB A port. The 1 Amp output is key for when you want to power the Pi, wifi adapters, maybe even small displays. We hooked it up to a NTSC display powered from the Pi's 5V breakout lines , wireless keyboard/mouse and a small WiFi dongle and it hummed along just fine as a mini computing setup! The charging circuit will draw 1A from a 5V supply plug a microUSB connector into the • Technical Details o Dimensions x / 48.6mm x 89.7mm x 21.4mm o Weight 126.7g no cables 1/23/2017

PDF Datasheet Preview

USB Battery Pack for Raspberry Pi 4000mAh - 5V 1A

PRODUCT ID 1565
• Description

A medium-sized rechargeable battery pack for your Raspberry Pi or Arduino, or Propeller, or anything else that uses 5V! . This pack is intended for providing a lot of power to an iPhone, cell phone, tablet, etc but we found it does a really good job of powering other miniature computers and micro-controllers. If you want even more power, we have a 10,000mAh power pack with two USB ports that can provide up to 2A! We tested it with an iPhone 5 & 5s so we know it will charge those models. It isn't good for charging large tablets that need 2A charging current such as the iPad. Inside is a 4000mAh lithium ion battery, a charging circuit you charge it via the USB cable attached , and a boost converters that provides 5VDC up to 1 Amp via a USB A port. The 1 Amp output is key for when you want to power the Pi, wifi adapters, maybe even small displays. We hooked it up to a NTSC display powered from the Pi's 5V breakout lines , wireless keyboard/mouse and a small WiFi dongle and it hummed along just fine as a mini computing setup! The charging circuit will draw 1A from a 5V supply plug a microUSB connector into the
• Technical Details
o Dimensions x / 48.6mm x 89.7mm x 21.4mm o Weight 126.7g no cables
1/23/2017

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 1565 Datasheet file may be downloaded here without warranties.

1565

1565 Datasheet

Datasheet ID: 1565 506576