Part | Datasheet |
---|---|
![]() |
EA337SH (pdf) |
Related Parts | Information |
---|---|
![]() |
ACT337SH-T |
PDF Datasheet Preview |
---|
High Performance ActivePSRTM Primary Switching Regulator • Ultra Low Standby Power < 30mW • Patented Primary Side Regulation Technology • Suitable Operation Frequency up to 85kHZ • Proprietary Fast Startup Circuit • Integrated Line and Primary Inductance Compensation • Integrated Programmable Output Cord Resistance Compensation • Line Under-Voltage, Output Over-Voltage, Output Short-Circuit and Over-Temperature Protection • Complies with all Global Energy Efficiency and CEC Average Efficiency Standards • Adjustable Power from 7W to 12W • Minimum External Components • SOP-8 Package utilizes Active-Semi’s proprietary primary-side feedback architecture to provide accurate constant voltage, constant current CV/CC regulation without the need of an opto-coupler or reference device. Integrated line and primary inductance compensation circuitry provides accurate constant current operation despite wide variations in line voltage and primary inductance. Integrated output cord resistance compensation further enhances output accuracy. The ACT337 achieves excellent regulation and transient response, yet requires less than 30mW of standby power. The ACT337 is optimized for compact size 7W to 12W charger applications. It is available in spacesaving 8 pin SOP-8 package. Figure 1: Simplified Application Circuit • RCC Adapter Replacements • Linear Adapter Replacements • Standby and Auxiliary Supplies The ACT337 belongs to the high performance patented ActivePSRTM Family of Universal-input AC/DC off-line controllers for battery charger and adapter applications. It is designed for flyback topology working in discontinuous conduction mode DCM . The ACT337 meets all of the global energy efficiency regulations CEC, European Blue Angel, and US Energy Star standards while using very few external components. The ACT337 ensures safe operation with complete protection against all fault conditions. Built-in protection circuitry is provided for output shortcircuit, output over-voltage, line under-voltage, and over temperature conditions. The ACT337 ActivePSRTM is optimized for high performance, cost-sensitive applications, and Innovative PowerTM Copyright 2012 Active-Semi, Inc. ACT337 ORDERING INFORMATION PART NUMBER TEMPERATURE RANGE ACT337SH-T -40°C to 85°C PACKAGE PINS SOP-8 PACKING METHOD TAPE & REEL TOP MARK ACT337SH PIN CONFIGURATION ACT337SH SOP-8 ACT337SH PIN DESCRIPTIONS PIN SOP-8 1 2,4,7 NAME SW GND BD VDD FB Switch Drive. Switch node for the external NPN transistor. Connect this pin to the external power NPN’s emitter. This pin also supplies current to VDD during startup. Ground 2,4 and 7 pin must be connected together . Base Drive. Base driver for the external NPN transistor. Power Supply. This pin provides bias power for the IC during startup and steady state operation. Feedback Pin. Connect this pin to a resistor divider network from the auxiliary winding. Current Sense Pin. Connect an external resistor RCS between this pin and ground to set peak current limit for the primary switch. The peak current limit is set by 0.396V x / RCS. For more detailed information, see Application Information. Innovative PowerTM Copyright 2012 Active-Semi, Inc. ACT337 ABSOLUTE MAXIMUM RATINGSc PARAMETER VDD, BD, SW to GND Maximum Continuous VDD Current FB, CS to GND Continuous SW Current Maximum Power Dissipation derate above TA = Junction to Ambient Thermal Resistance Operating Junction Temperature Storage Junction Lead Temperature Soldering, 10 sec VALUE to + 28 100 to + 6 Internally limited 150 -40 to 150 -55 to 150 300 UNIT V mA V A W c Do not exceed these limits to prevent damage to the device. Exposure to absolute maximum rating conditions for long periods may affect device reliability. ELECTRICAL CHARACTERISTICS VDD = 12V, VOUT = 5V, LP = 1.25mH, NP = 110, NS = 8, NA = 18, TA = 25°C, unless otherwise specified. PARAMETER Supply VDD Turn-On Voltage VDD Turn-Off Voltage Supply Current Start Up Supply Current BD Current during Startup Internal Soft Startup Time Oscillator |
More datasheets: EMI-1812-125 | EMI-0805-120 | EMI-1206-120 | E125N50X4 | BBBWL-SC-562 | ROB0107 | DM74AS08MX | DM74AS08M | DM74AS08N | FIT0479 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EA337SH Datasheet file may be downloaded here without warranties.