UY-25/PACK

UY-25/PACK Datasheet

Part	Datasheet
UY-25/PACK	UY-25/PACK (pdf)

Related Parts	Information
UR-500/BTL	UR-500/BTL
UR(CART)	UR(CART)
UY-500/BTL	UY-500/BTL
UR-JAR500	UR-JAR500
UY(BULK)	UY(BULK)
UY(CART)	UY(CART)
UR(BX)	UR(BX)
UY(BX)	UY(BX)
UR-25/PACK	UR-25/PACK
UR(BULK)*	UR(BULK)*

PDF Datasheet Preview
Scotchlok UR, UY, and UB2 connectors Proven splicing technology designed for your specific splicing applications. The 3M Scotchlok UR connector for general butt splicing. The original Scotchlok connector, the UR, has proven its dependability over 25 years of telephone industry use. The UR connector accepts any two or three solid copper conductor combinations of 0,9 mm - 0,4 mm 19 - 26 AWG air core or filled cable with a maximum insulation filled cable with a maximum insulation O.D. of 1,67 mm Its three ports accept two or three conductors for butt splicing. Like most Scotchlok connectors, the UR connector is filled with a sealant to provide moisture resistance. The UR connector is available in box, bulk, bin, cartridge and strip. The cartridges, containing ten connectors each, are for use with the 3M Scotchlok E-9C tool, while the strips, containing 100 connectors, are for use with the E-9CH tool. The 3M Scotchlok UY connector for smaller splice bundles. Approximately half the size of the UR, the UY connector can handle a higher pair count cable and keep the splicing bundle O.D. to a minimum. The UY connector’s two ports accept any two solid copper conductor combinations of 0,65 mm - 0,4 22 26 AWG filled or air core cable with a maximum insulation O.D. of 1,52 mm Factory inserted sealant insulates the connections, protects against corrosion, and seals out moisture. The UY connectors are available in box, bulk, bin, cartridge and strip. The 3M Scotchlok UB2 connector a unique timesaver for tap splicing. The pre-crimp feature of this compact bridging connector gives the craftsperson a time-saving edge. By positioning the UB2 connector on the conductor and pre-crimping it in place, the craftsperson prevents the conductor on the run wire port form slipping out of the connector before the crimp is completed. Like the UYconnector, a factory-installed sealant insulates against corrosion, and seals out moisture. The UB2 connector permits tapping directly onto an existing conductor without interrupting service. In ready access closures, the connector eliminates cutting cable pairs, opening pairs, and piercing out wires. Faster and easier to work with than other bridging connectors, the UB2 accepts 19-26 AWG - mm plastic-, paper-, or pulp-insulated solid copper wire with a maximum O.D. of 2,08 mm The wires joined can be of different wire gauges. The UB2 connector is available in box and bin. Scotchlok connectors from 3M...the quality connection for voice and data. Ordering Information Scotchlok UR Connector Butt Connector Box Packing 100/box, 1000/cs., 1,36 kg 3 lbs /cs. Shipping Unit 1000 Connectors Bulk Packing 500/box, 5000/cs., 6,7 kg lbs /cs. Shipping Unit 5000 Connectors Bin Packing 20/bag, 1000/bin, 1,4 kg lbs /cs. Shipping Unit 1000 Connectors Cartridge Packing 10/Cart, 100/pk, 1000/cs., 2,09 kg lbs /cs. Shipping Unit 1000 Connectors 10 packs Strip Packing 100/strip, 1000/cs., 1,6 kg lbs /cs. Shipping Unit 1000 Connectors Product Specifications Scotchlok UY Connector Butt Connector Box Packing 100/box, 1000/cs., 0,9 kg lbs /cs. Shipping Unit 1000 Connectors Bulk Packing 1000/box, 5000/cs., 2,8 kg lbs /cs. Shipping Unit 5000 Connectors Bin Packing 20/bag, 1000/bin, 0,68 kg lbs /cs. Shipping Unit 1000 Connectors Cartridge Packing 16/Cart, 160/pk, 1600/cs., 1,4 kg lbs /cs. Shipping Unit 1600 Connectors 10 packs Strip Packing 100/strip, 1000/cs., 0,86 kg lbs /cs. Shipping Unit 1000 Connectors Scotchlok UB2 Connector Tap Connector Box Packing 100/box, 1000/cs., 1,2 kg lbs /cs. Shipping Unit 1000 Connectors Bin Packing 20/bag, 1000/bin, 1,1 kg lbs /cs. Shipping Unit 1000 Connectors SCOTCHLOK CONNECTOR UR UY UB2 TYPE CONNECTION MAXIMUM INSULATION O.D. Metric PIC-unfilled metric 19-26 22-26 19-26 CABLE TYPE PIC-filled metric 22-26 22-26 22-26 Pulp or Paper* metric 19-26 APPROVED TOOLS To reduce fatigue, use tool within each splicing group with highest mechanical advantage indicated in

PDF Datasheet Preview

Scotchlok

UR, UY, and UB2 connectors

Proven splicing technology designed for your specific splicing applications.

The 3M Scotchlok UR
connector for general butt
splicing.

The original Scotchlok connector, the UR, has proven its dependability over 25 years of telephone industry use. The UR connector accepts any two or three solid copper conductor combinations of 0,9 mm - 0,4 mm 19 - 26 AWG air core or filled cable with a maximum insulation filled cable with a maximum insulation O.D. of 1,67 mm

Its three ports accept two or three conductors for butt splicing. Like most Scotchlok connectors, the UR connector is filled with a sealant to provide moisture resistance.

The UR connector is available in box, bulk, bin, cartridge and strip. The cartridges, containing ten connectors each, are for use with the 3M Scotchlok E-9C tool, while the strips, containing 100 connectors, are for use with the E-9CH tool.

The 3M Scotchlok UY
connector for smaller splice
bundles.

Approximately half the size of the UR, the UY connector can handle a higher pair count cable and keep the splicing bundle O.D. to a minimum.

The UY connector’s two ports accept any two solid copper conductor combinations of 0,65 mm - 0,4 22 26 AWG filled or air core cable with a maximum insulation O.D. of 1,52 mm Factory inserted sealant insulates the connections, protects against corrosion, and seals out moisture.

The UY connectors are available in box, bulk, bin, cartridge and strip.

The 3M Scotchlok UB2
connector a unique
timesaver for tap splicing.

The pre-crimp feature of this compact bridging connector gives the craftsperson a time-saving edge. By positioning the UB2 connector on the conductor and pre-crimping it in place, the craftsperson prevents the conductor on the run wire port form slipping out of the connector before the crimp is completed. Like the UYconnector, a factory-installed sealant insulates against corrosion, and seals out moisture.

The UB2 connector permits tapping directly onto an existing conductor without interrupting service. In ready access closures, the connector eliminates cutting cable pairs, opening pairs, and piercing out wires.

Faster and easier to work with than other bridging connectors, the UB2 accepts 19-26 AWG - mm plastic-, paper-, or pulp-insulated solid copper wire with a maximum O.D. of 2,08 mm The wires joined can be of different wire gauges.

The UB2 connector is available in box and bin.

Scotchlok connectors from 3M...the quality connection for voice and data.
Ordering Information

Scotchlok UR Connector

Butt Connector Box Packing 100/box, 1000/cs., 1,36 kg 3 lbs /cs. Shipping Unit 1000 Connectors

Bulk Packing 500/box, 5000/cs., 6,7 kg lbs /cs. Shipping Unit 5000 Connectors

Bin Packing 20/bag, 1000/bin, 1,4 kg lbs /cs. Shipping Unit 1000 Connectors

Cartridge Packing 10/Cart, 100/pk, 1000/cs., 2,09 kg lbs /cs. Shipping Unit 1000 Connectors 10 packs

Strip Packing 100/strip, 1000/cs., 1,6 kg lbs /cs. Shipping Unit 1000 Connectors

Product Specifications

Scotchlok UY Connector

Butt Connector Box Packing 100/box, 1000/cs., 0,9 kg lbs /cs. Shipping Unit 1000 Connectors

Bulk Packing 1000/box, 5000/cs., 2,8 kg lbs /cs. Shipping Unit 5000 Connectors

Bin Packing 20/bag, 1000/bin, 0,68 kg lbs /cs. Shipping Unit 1000 Connectors

Cartridge Packing 16/Cart, 160/pk, 1600/cs., 1,4 kg lbs /cs. Shipping Unit 1600 Connectors 10 packs

Strip Packing 100/strip, 1000/cs., 0,86 kg lbs /cs. Shipping Unit 1000 Connectors

Scotchlok UB2 Connector

Tap Connector Box Packing 100/box, 1000/cs., 1,2 kg lbs /cs. Shipping Unit 1000 Connectors

Bin Packing 20/bag, 1000/bin, 1,1 kg lbs /cs. Shipping Unit 1000 Connectors

SCOTCHLOK CONNECTOR

UR UY UB2

TYPE CONNECTION

MAXIMUM

INSULATION

O.D.

Metric

PIC-unfilled
metric
19-26
22-26 19-26

CABLE TYPE

PIC-filled
metric
22-26
22-26
22-26

Pulp or Paper*
metric
19-26

APPROVED TOOLS

To reduce fatigue, use tool within each
splicing group with highest mechanical
advantage indicated in

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived UY-25/PACK Datasheet file may be downloaded here without warranties.

Datasheet ID: UY-25/PACK 521569