14H26-SZLM-200-0LC

14H26-SZLM-200-0LC Datasheet


14H26-SZ3X-XXX-0LC

Part Datasheet
14H26-SZLM-200-0LC 14H26-SZLM-200-0LC 14H26-SZLM-200-0LC (pdf)
Related Parts Information
14H26-SZLM-500-0LC 14H26-SZLM-500-0LC 14H26-SZLM-500-0LC
PDF Datasheet Preview
3M Mini D Ribbon MDR Cable Assembly

High Speed Digital CameraLink Cable Right Angle
14H26-SZ3X-XXX-0LC
• Supports Industrial CameraLink standard for camera to frame grabber communications
• Space-saving right angle cable exit
• 11 shielded twin-ax pairs and four drain wires
• Entire cable bundle is shielded with foil and braid for additional signal protection
• Rugged MDR ribbon type contact
• Rugged thumbscrew retention
• EMI shielded junction shell on straight end
• EMI shielded overmolded shell on right-angle end
• See Regulatory Information Appendix RIA for chemical compliance information

Date Modified January 24,

Physical

Connector Contact Plating Wiping Area 30 µ ” µm] Min. Gold RIA E1 & C1 apply

Overmolded Shell Color Black

Material Polyvinyl Chloride PVC Shell Color Beige

Material Polyester Elastomer Cable Color Beige

Jacket Material Polyvinyl Chloride PVC Flammability AWM VW-1

Electrical

Voltage Rating 30V Current Rating 1 A Insulation Resistance > 1 x 108 Ω at 100 VDC Withstanding Voltage 350 VRMS for 1 minute Individually Shielded Twisted Pairs Characteristic Impedance 100 ± 10 Ω Conductor Size 28 AWG Stranded Propagation Velocity ns/ft ns/m ] Skew within pair 50 ps/meter maximum Skew channel skew per chipset 50 ps/meter maximum

Environmental

Temperature Rating -20 °C to +75 °C

UL File No. E86982

TS-2262-A Sheet 1 of 3

Electronic Solutions Division Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M Mini D Ribbon MDR Cable Assembly

High Speed Digital CameraLink Cable Right Angle
14H26-SZ3X-XXX-0LC

Right-Angle End

Straight End
#4-40 Thumbscrews
2X 26 Position High Density Mini D Ribbon MDR Male Plug

Cable Length

Cable Length Tolerance is the Larger of +50mm / -0mm or +3% / -0%

MDR 26 Position Plug Right-Angle End 1

MDR 26 Position Plug Straight End 13
14H26-SZ3M-XXX-0LC
14H26-SZ3S-XXX-0LC

Use 3M Jacksocket 3341-31 for mounting receptacle to panel.
mm [inch]

Tolerance Unless Noted
mm [ ] Dimensions for Reference Only
Ordering Information

Right Angle Orientation M = Position 1 opposite cable S = Position 1 on cable side
3 Electronic Solutions Division Interconnect Solutions
14H26-SZ3X-XXX-0LC

Cable Length
050 = 50 cm
300 = 300 cm
600 = 600 cm
100 = 100 cm
350 = 350 cm
700 = 700 cm
150 = 150 cm
400 = 400 cm
800 = 800 cm
200 = 200 cm
450 = 450 cm
900 = 900 cm
250 = 250 cm
500 = 500 cm

A00 = 1000 cm

For lengths greater than 1000 cm refer to Table 2

TS-2262-A Sheet of 3
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M Mini D Ribbon MDR Cable Assembly

High Speed Digital CameraLink Cable Right Angle
14H26-SZ3X-XXX-0LC

Camera Connector
1 14 2 15 3 16 4 17 5 18 6 19 7 20 8 21 9 22 13 23 11 24 12 15 13 26

Table Cable Assembly and Camera Link Pinouts

Medium and Full Configurations

Base Configuration

Two Channel Link Chips

One Channel Link Chip + Camera Control + Serial Communication

Right Angle Frame Grabber

Channel Link Signal

Cable Name Reference only

Camera Connector

Right Angle Frame Grabber

Channel Link Signal
inner shield
inner shield
inner shield
inner shield
inner shield
inner shield

Pair 1

Pair 1

Pair 2-

Pair 2+

Pair 3-

Pair 3+

Yclk-

Pair 4-

Xclk-

Yclk+

Pair 4+

Xclk+

Pair 5-

Pair 5+
100 ohm

Pair 6+

SerTC+
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373

Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect

EUROPE Appendix E1 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217B-D

Appendix E5 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC.

This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

CHINA Appendix C1 China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2 China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below.

RIA-2217B-D

Appendix C3 China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty Limited Remedy Limited Liability.

This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373

Please recycle. Printed in USA. 3M All rights reserved. RIA-2217B-D
3M is a trademark of 3M Company.
More datasheets: PWR220-2SA3R92F | PWR220-2SBR100J | PWR221-2SBR015J | PWR220-2SBR050J | PWR220-4SBR002J | PWR220-4SBR003F | PWR220-4SBR010J | PWR220-2SBR010J | PWR220-4SBR050J | DM74S133N


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 14H26-SZLM-200-0LC Datasheet file may be downloaded here without warranties.

Datasheet ID: 14H26-SZLM-200-0LC 521558