72-N6

72-N6 Datasheet


3M Scotchcast Inline Splice Kits, 72-N Series 3M Scotchcast Re-Enterable Signal and Control Cable Splice Kits 78-R Series.................155 3M Scotchcast Multi-Mold Resin Splice Kits 85 Series 3M Scotchcast Wye Resin Splice Kit 3M Scotchcast Flexible Power Cable Tap Splice Kit 3M Scotchcast Inline Resin Power Cable Splice Kits 82-A 3M Scotchcast Wye Resin Splice Kit 3M Scotchcast Flexible Power Cable Inline Splicing Kits 82-F 3M Scotchcast Flame-Retardant Compound 2131 3M Scotchcast Potting Kit 2136 3M Resin Pressure System Components

Part Datasheet
72-N6 72-N6 72-N6 (pdf)
Related Parts Information
72-N5 72-N5 72-N5
72-N4 72-N4 72-N4
72-N1 72-N1 72-N1
72-N3 72-N3 72-N3
72-N2 72-N2 72-N2
PDF Datasheet Preview
Low Voltage Splices, 1000 V or less

Low Voltage Splices, 1000 V or less

For installations from 120 V to 1 kV, 3M offers several low voltage splice options, including 3M-developed cold shrink technology, heat shrink, resin and tape. 3M Low Voltage Splices are reliable in buried, overhead, indoor or outdoor applications.

Section
3M Heat Shrink Splice
3M Splice Kit UF 3M Airport Lighting Connector Sealing Kit 3M Heat Shrink Heavy-Wall Cable Sleeves ITCSN
3M Direct Bury Splice Kits
3M Direct Bury Splice Kit 3M Direct Bury Splice Kit DBR/Y-6
3M Resin Splice Kits
3M Scotchcast Inline Splice Kits, 72-N Series 3M Scotchcast Re-Enterable Signal and Control Cable Splice Kits 78-R Series.................155 3M Scotchcast Multi-Mold Resin Splice Kits 85 Series 3M Scotchcast Wye Resin Splice Kit 3M Scotchcast Flexible Power Cable Tap Splice Kit 3M Scotchcast Inline Resin Power Cable Splice Kits 82-A 3M Scotchcast Wye Resin Splice Kit 3M Scotchcast Flexible Power Cable Inline Splicing Kits 82-F 3M Scotchcast Flame-Retardant Compound 2131 3M Scotchcast Potting Kit 2136 3M Resin Pressure System Components
3M Cold Shrink Splice
3M Cold Shrink Connector Insulators 8420 and 8430 3M Cold Shrink Silicone Insulators 8440 Series 1000 Volts or less 3M Cold Shrink Quick Insulator QI Series 3M Cold Shrink Quick Splice Low Voltage QSLV-M 3M Cold Shrink Connector Insulator WF 3M Inline Splices for 3/C or 4/C Armored Power Cable Teck-90 5730 Series 3M Resin/Cold Shrink Non-Shielded, Armored or Non-Armored Splice Kits 5750 Series 3M Cold Shrink Portable Cable Splice Kits 2237A and

PHONE 800-245-3573

Cable Types for Low Voltage Splicing

Single Conductor Cable Multiple Conductor Unshielded Signal and Control Cable Multiple Conductor Shielded Signal and Control Cable

Low Voltage Splices, 1000 V or less

Multiple Conductor, to 1000 Volt, Cable Three-Conductor Armored, Non Shielded Cable Three-Conductor Non-Armored, Non Shielded Cable

FAX 800-245-0329

Low Voltage Splices, 1000 V or less
3M Heat Shrink Splice Kits
3M Splice Kit UF
3M Splice Kit UF is designed to provide a reliable, moisture proof electrical connection for type UF-B underground feeder cable rated for 600 V copper wire only ranging from #14/3 without ground wire up to #8/3 with ground wire.

The UF splice kit consists of a connector-insulation assembly and a heat shrink tube. The connector assembly contains four cylindrical set screw connectors separated by a piece of vinyl insulation. The heat shrink tube is a heavy-wall, adhesive-lined tube. Underground Feeder UF -B cables are flat, and typically have three solid conductors without a ground or two solid conductors with a ground. They range in size from AWG. The most common UF cable size is AWG.

Voltage Rating Number of Conductors

Cable/Shielding Type Splice Type

Operating Temperature Range

RoHS 2011/65/EU
600 V copper wire only Single Conductor Non-Shielded Heat Shrink -67°F to 230°F -55°C to 110°C

Agency Approvals

UL 486D listed E102356

Manufacturing Origin

Order No.

Conductor Size

UF1-Splice Kit-6 Kits UF2-Splice Kit-6 Kits
054007-42920 054007-42921

UF Splice Kit-Standard includes 45,7 mm length connector/ 203,2 mm length of heavy AWG wall, adhesive lined heat shrink tube.

UF Splice Kit-Stretcher offers an 292,1 mm length connector/ 508,0 mm length of AWG heavy wall, adhesive lined heat shrink tube. The Stretcher Kit is used in situations where a cm section of the cable has been damaged or destroyed.

Min. Order Qty.

Case Qty.
6 kits 6 kits
6 kits 6 kits
Use the 3M Scotchcast Inline Resin Splice Kits 82-A Series to insulate and seal single conductor, unshielded cable splices through 5 kV and multiple conductor cables through 1 kV. Designed for use in weather-exposed or direct-burial locations. UL listed for direct burial and submerged applications up to 600 V and 90°C. For use with UL listed connectors only. Important Use insulation jacket or connector O.D. for final ordering criteria. *Conductor size is 3/0 kcmil when using a 3M Scotchlok Copper Compression Connector

Voltage Number of Conductors

Cable/Shielding Type Splice Type

RoHS 2011/65/EU
600 V or less Direct Bury and Submerged Applications 1000 V Multiple 5 kV Single

Single and Multiple

Multiple Conductor Portable Cable, Non-Shielded, Single Conductor Portable Cable

Resin

Agency Approvals

Certified for 600 V or less

Order No.
82-A 82-A1 82-A2 82-A3
054007-25016 054007-25024 054007-25032 054007-25040

Conductor Size
10-2 AWG 18-2 AWG 2-3/0 AWG 3/0 AWG-400 kcmil*

Max. Connector O.D.
10,3 mm 10,3 mm 15,9 mm 25,4 mm

Max. Cable O.D.
19,1 mm 15,9 mm 25,4 mm 39,7 mm

Max. Sheath Opening L
114,3 mm 114,3 mm 152,4 mm 228,6 mm

Case Qty.
3M Scotchcast Wye Resin Splice Kit 82-B1
3M Scotchcast Wye Resin Splice Kit 82-B1 insulates and seals wye splices for compression tap connectors e.g., C-tap or H-tap rated for cables up to 5 kV. Use on nonshielded cables through 5 kV and on multiple conductor cables through 1 kV. This kit will accommodate both split bolt and crimped conductors. Each kit makes one splice. Connectors are not included in the kit and must be purchased separately.

Voltage Number of Conductors

Cable/Shielding Type

Splice Type RoHS 2011/65/EU
1000 V 5 kV Multiple 1000 V , Single 5 kV Multiple Conductor Portable Cable, Non-Shielded, Single Conductor Portable Cable Resin Yes

Order No. UPC

Voltage Rating
82-B1
054007-25057 5 kV Single 1 kV Multiple

Cable O.D.
6,4-16,0 mm

Max. Conductor Size Split Bolt

Max. Conductor Size Crimped

Case Qty.
4 AWG
2 AWG

Low Voltage Splices, 1000 V or less

FAX 800-245-0329
Important Use insulation jacket or connector O.D. for final ordering criteria.
* Mastic pads included for cable O.D. build-up. ** Kit contains adapters. *** These sizes are listed for availability only and are not designed to be used as primary insulation. These tubes are for conduit sealing and breakouts. ****Maximum connector length:
"Point of Purchase" packaging designated by "P". Example 8423-6P

Voltage Number of Conductors

Cable Type Splice Type

RoHS 2011/65/EU Agency Approvals
1000 V or less Single Conductor Low Voltage Single Conductor Insulated Cable Cold Shrink Primary electrical insulation for all solid dielectric rubber and plastic insulated wire and cable splicing rated to 1000 V. Good for repairs and environmental sealing for communication and other non-electrical applications.

Yes ANSI C1191.1

Order No. UPC

Typical Conductor Size
8423-6 8423-6P 8424-8** 8424-8P 8425-8 8425-8P 8426-9 8426-9M* 8426-9P 8426-11 8427-6*** 8427-12 8427-12P 8427-16 8428-6***
054007-42146 054007-42864 054007-42390 054007-42865 054007-42391 054007-42866 054007-34457 054007-43436 054007-42867 054007-34458 054007-09915 054007-34459 054007-42868 054007-34460 054007-09916
6-4 AWG 14-16
6-4 AWG 14-16
10-1/0 AWG 6-16
10-1/0 AWG 6-16
2-1/0 AWG 35-50
2-1/0 AWG 35-50
2/0 AWG-250 kcmil 70-125
2-4/0 AWG 30-90
2/0 kcmil 70-125
2/0 AWG-250 kcmil 70-125
250-400 kcmil 125-200
250-400 kcmil 125-200
250-400 kcmil 125-200

Min. Cable Dia. Max. Dia. Insulator Cable or Connector Max. Connector Relaxed Tube Case
for Seal

Covers

Length

Length

Qty.
7,8 mm 14,2 mm
50,8 mm 152,4 mm 10
7,8 mm 14,2 mm
50,8 mm 152,4 mm 10
2,5 mm 20,9 mm
76,2 mm 203,2 mm 10
2,5 mm 20,9 mm
76,2 mm 203,2 mm 10
10,1 mm 20,9 mm
76,2 mm 203,2 mm 10
The 3M Molded Rubber QS-II Inline CN/JCN Cable Splice Kits 5450 Series kits are one-piece inline splices designed for use on 25/28 kV CN and JCN cable. Meets requirements of IEEE 404 for cable joints. Each kit makes one splice. Connectors, unless specified, are not included in the kit, and must be ordered separately. Use the primary insulation O.D. range for final conductor size ordering criteria. If connector is desired packed with any of the kits shown above, add the connector number after the splice number example 5451-CI-1/0A . Jacketing kit is needed for JCN cable. Note Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Voltage Number of Conductors

Shielding Type

Splice Type Technology
25/28 kV Single Conductor Concentric Neutral CN , Jacketed Concentric Neutral JCN Inline Molded Rubber

Order No.
5451-CI-2A 5451-CI-1A 5451-CI-21-840 5451-CI-1/0A 5451-CI-1/0-840 5452
054007-09127 054007-09152 054007-09935 054007-09154 054007-09153 054007-09155 054007-09128

Insulation O.D. Range
21,1-26,4 mm 21,1-26,4 mm 21,1-26,4 mm 21,1-26,4 mm 21,1-26,4 mm 21,1-26,4 mm 25,4-29,2 mm

Concentric Neutral CN Cable

Jacketed Concentric Neutral JCN Cable

Conductor Size
2-2/0 AWG 60 2 AWG 33 1 AWG 42 2-1 AWG 33-42 1/0 AWG 53 1/0 AWG 53 3/0-4/0 AWG 95

Connector Included

CI-2A CI-1A CI-21-840 CI-1/0A CI-1/0-840 -

Case Qty.

PHONE 800-245-3573
25/28 kV 3M Molded Rubber Splice Kits Single Conductor 1/C
3M Molded Rubber QS-II Inline CN/JCN Cable Splice Kits 5451A Series

The 3M Molded Rubber QS-II Inline CN/JCN Cable Splice Kits 5451A Series is a 25/28 kV class inline splice designed for joining concentric neutral CN and jacketed concentric neutral JCN distribution class power cables. The splice is a one-piece molded design made of specially formulated, peroxide cured EPDM rubbers. Each splice is production tested on CN cable to ensure reliability. The splice is designed for use with special CI-series Inline Compression Connectors for connecting either aluminum or copper conductors. The 5451A Quick Splice II splice meets the 25 kV voltage rating requirements of IEEE Each kit makes one splice. Jacketing kit is needed for JCN cable. Connectors, unless specfied, are not included in the kit, and must be ordered separately. Refer to the index to find CI, CI-840 and CI-A series connectors. Note CI-A series connectors are sized for 5/8 crimping die CI-2/0 and CI-840 series connectors are sized for 840 crimping die. Note Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Voltage 25/28 kV Number of Conductors Single Conductor Shielding Type Concentric Neutral CN , Jacketed Concentric Neutral JCN Splice Type Inline Technology Molded Rubber

Medium Voltage Splice Kits, 5 kV

Order No. 5451A-CI-1A

UPC 054007-49527 054007-49529

FAX 800-245-0329

Case Qty.

Medium Voltage Splice Kits, 5 kV
25/28 kV 3M Molded Rubber Splice Kits Single Conductor 1/C
3M Molded Rubber QS-II Inline CN/JCN Cable Splice Kits 5451A Series continued

Order No.
5451A-CI-1/0A 5451A-CI-21-840 5451A-CI-1/0-840 5451A-CI-2/0
054007-49530 054007-49532 054007-49528 054007-49531

Case Qty.
3M Connectors CI and CI-A Series

Meets the requirements of ANSI C119.4

Order No.

CI-22A CI-2A CI-1A CI-21-840 CI-1/0A CI-1/0-840 CI-2/0 CI-3/0 CI-4/0 CI-250 CI-350 CI-450 CI-500 CI-650 CI-750
054007-15868 054007-00721 054007-00722 054007-09136 054007-14176 054007-09137 054007-11875 054007-11883 054007-11891 054007-11909 054007-11925 054007-11933 054007-25644 054007-11941 054007-25651

Conductor Size
2 AWG Solid 2 AWG Stranded, 1 AWG Solid 2-1 AWG Stranded, 1-1/0 AWG Solid 2-1 AWG Stranded, 1-1/0 AWG Solid 1/0 AWG Stranded 1/0 AWG Stranded 2/0 AWG Stranded 3/0 AWG Stranded 4/0 AWG Stranded 250 kcmil Stranded 350 kcmil Stranded 500 kcmil Compact 500 kcmil Stranded 750 kcmil Compact 750 kcmil Stranded
3M Molded Rubber QS CN/JCN Cable Splice Kits 5432 and 5433 are inline splices designed for use on 35 kV CN or JCN cable. Meets requirements of IEEE Important On all QS kits use the primary insulation O.D. range for final ordering criteria. For copper or aluminum conductor cable, select the correct splice with connector from the table provided. Jacketing kit is needed for JCN cable. Each kit makes one splice. Connectors are packed in kits when indicated. Note Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Voltage Number of Conductors

Shielding Type

Splice Type Technology
35 kV Single Conductor Concentric Neutral CN , Jacketed Concentric Neutral JCN Inline Molded Rubber

Concentric Neutral CN Cable Jacketed Concentric Neutral JCN Cable

Order No.
5432-CI-1A
5432-CI-1/0A 5433-CI-3/0B 5433-CI-4/0B
054007-02338 054007-08357
054007-31222 054007-02339 054007-49485 054007-49486

Insulation O.D. Range
26,9-30,7 mm 26,9-30,7 mm
26,9-30,7 mm 28,4-33,5 mm 28,4-33,5 mm 28,4-33,5 mm

Conductor Size
2-1/0 AWG 1 AWG Stranded 1/0 AWG Solid 1/0 AWG Stranded 3/0-4/0 AWG 3/0 AWG 4/0 AWG

Connector Included

CI-1A

CI-1/0A CI-3/0B CI-4/0B

Case Qty.

Medium Voltage Splice Kits, 5 kV

FAX 800-245-0329

Medium Voltage Splice Kits, 5 kV
35 kV 3M Molded Rubber Splice Kits Single Conductor 1/C
3M Molded Rubber QS-II CN/JCN Cable Splice Kits 5461
3M Molded Rubber QS-II CN/JCN Cable Splice Kits 5461 Series are inline splices designed for use on 35 kV CN or JCN cable. Meets requirements of IEEE Important On all QS kits use the primary insulation O.D. range for final ordering criteria. For copper or aluminum conductor cable, select the correct splice with connector from the table provided. Jacketing kit is needed for JCN cable. Each kit makes one splice. Connectors are packed in kits when indicated. Note Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Voltage Number of Conductors

Shielding Type

Splice Type Technology
35 kV Single Conductor Concentric Neutral CN , Jacketed Concentric Neutral JCN Inline Molded Rubber

Concentric Neutral CN Cable Jacketed Concentric Neutral JCN Cable

Order No.
5461-CI-1/0A 5461-CI-1/0-840
054007-09129 054007-09156 054007-09157

Insulation O.D. Range
25,4-29,2 mm 25,4-29,2 mm 25,4-29,2 mm

Conductor Size
1-1/0 AWG 1/0 AWG 1/0 AWG

Connector Included

CI-1/0A CI-1/0-840

Case Qty.
3M Connectors CI-A and CI-840 Series for 3M Molded Rubber QS Cable Splice Kits 5432 and 5461 Series
3M Aluminum Connectors CI Series are for splicing applications on aluminum or copper cable conductors. The aluminum connectors CI Series are specially designed for use with 3M Molded Rubber QS Cable Splice Bodies. These connectors meet the requirements of ANSI C119.4.

Barrel Style Standard Barrel

Connector Base Material

Aluminum

For use with Aluminum or Copper Conductors

Order No.

CI-1A CI-1/0A CI-1/0-840 CI-3/0B CI-4/0B
054007-00722 054007-14176 054007-09137 -

Stranded Conductor Size, Cu or Al
2-1 AWG 1/0 AWG 1/0 AWG 3/0 AWG 4/0 AWG

Solid Conductor Size, Cu or Al
1-1/0 AWG 3/0 AWG 4/0 AWG

Connector O.D.
23,1 mm 23,1 mm 23,1 mm 23,1 mm 23,1 mm

Case Qty.

PHONE 800-245-3573
35 kV 3M PILC Splice Kits Single Conductor 1/C
3M Cold Shrink QS-III 1/C Transition Splice Kits 5530A-1T-PILC Series
3M Cold Shrink QS-III 1/C Transition Splice Kits, 5530A-1T-PILC Series which includes 5535A-1T-PILC, 5536A-1T-PILC, and 5537A-1T-PILC are 35 kV class inline splices designed to transition single-conductor PILC to Poly/EPR cable and meet the 35 kV voltage class rating requirements of IEEE Std. The splice kits include an oil barrier system based on a cold shrink tube design of specially formulated, oil-resistant polymer, and laboratory tested to nominal internal pressures of 40 psi with no oil leakage. The splice body itself is a one-piece molded design made of specially formulated silicone rubber. An EPDM rubber foldback cold shrink jacket is included for physical protection and environmental sealing. Each kit contains sufficient material to make one splice. Connector is not provided with the kits due to customer specific application requirements. To ensure a positive oil stop, a non-tapered, sealed connector with a solid center barrier should be used. Note Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Voltage Number of Conductors

Shielding Type Splice Type Technology
35 kV Single Conductor Paper Insulated Lead Covered PILC Inline PILC Transition Cold Shrink

Order No.

Max. O.D. Over Lead PILC Cable Insul. Poly/EPR Cable
More datasheets: T1080 | F221MS/2 BK032 | 17000193A | 3GC5V | 3GD5V | 3GT5V | HSMW-C170 | 17801 | FCM8531QY | FCM8531RQY


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 72-N6 Datasheet file may be downloaded here without warranties.

Datasheet ID: 72-N6 521394