8310-G

8310-G Datasheet

8310 8313 8310-G 6310 6313

Part	Datasheet
8310-G	8310-G (pdf)

PDF Datasheet Preview
SC Connectors and Accessories A Family of SC Connectors 3M offers a full line of SC Connectors, including Epoxy, Hot Melt, Crimplok , Low EMI, and Angled Polished Connectors, to meet all your connector needs. 3M has the design of the SC Connector to enhance performance and cable retention and provide readily mountable connectors. The connector is fully compliant with NTT, JIS, ISO/IEC and TIA/EIA component and ISO/IEC, CENELEC, ANSI, TIA/EIA-568A and BICSI system and cabling level standards. The 3M SC Connector has a rectangular push-pull coupling mechanism for easy insertion and high repeatability. The zirconia ceramic ferrule, with a proprietary PC assures low attenuation and can now minimize power to dB on factory polished single-mode cable assemblies. The SC Connector is designed for the most advanced optic systems requiring exceptional stability, low single-mode and high density. This versatile connector offers easy installation in both long and short transmission lines, subscriber networks or premises environments. The 3M Field-Mountable Connector maximizes termination yield through ease of mounting and a high performance polishing procedure. The extended ferrule collar assembly ensures that the adhesive encapsulates the end of the buffer without wicking or spreading. The four-piece design connector, shell, crimp ring and boot is mounted using the same simple process used for other 3M connectors. The 3M SC Low EMI Connector has unique material, which minimizes electromagnetic interference for routers and switches and test bed applications. The SC Epoxy and Low EMI Connectors are available in single-mode and multimode utilizing epoxy adhesive. The SC Hot Melt Connector, available in single-mode and multimode, is preloaded with Hot-Melt adhesive, enabling a termination in less than two minutes for multiple terminations. The SC Crimplok Connector, also available in both single-mode and multimode, combines the speed of non-adhesive connectors with the performance characteristics of epoxy and hot melt connectors. The SC Hot Melt and Crimplok Connectors are intended for ease of termination in local area network and meet requirements of system and cabling level standards. 3M also offers the following to help ensure you meet any and all of your connector needs. A variety of distribution units are available to accommodate the SC design. For high cable assembly applications, try the 3M Fiber Optic Bulk Pack. Consisting of 1,000 connectors, boots and accessories, the 3M Bulk Pack dramatically decreases assembly time and cost. 3M offers a standard boot, as well as shorter boots for high density, space applications. mm boots for smaller jacket sizes ranging from mm to mm and buffer boots for 900 µm buffered are also available. SC Connector SC Hot Melt Connector All 3M SC Connectors are available without the 3M logo for private labeling. SC Connectors and Cable Assemblies Features Intermateable within NTT Push pull mating Pull-proof independent ferrule 3M PC Zirconia ceramic ferrule Thermoplastic shell Fewer parts Hot Melt Version Only in addition to above Pre-loaded Hot Melt adhesive No waiting for epoxy to cure Single step polish No compatibility issues High density, repeatable connections Maintains optical contact Excellent transmission performance Reduces problems Factory polish to dB single-mode epoxy only * Field polish to dB single-mode epoxy only * Corrosion resistant Fast, simple termination Extended shelf life, fewer consumables saves money Termination in 2 minutes productivity Only one abrasive to buy faster polishing reduces cost short boot available Single-Mode Epoxy Insertion Loss dB 0 -56 Single-Mode Epoxy Reflection dB FREQUENCY SC 8° Angled PC Cable Assemblies 8° Angle polish on ferrule patents issued US 5,351,327, US 5,458,582, US 5,321,784 Contacting Isolated ferrule design Push-pull mating SC Zirconia ceramic ferrule Thermoplastic shell Low mated or unmated intermateable with other SC 8° angled connectors meeting industry standards Low, stable insertion loss Not affected by cable disturbance High density, repeatable connections Durable, compliant material Corrosion resistant SC 8° Angled PC Cable Assemblies, Single-mode In order to meet the system requirements of the cable TV industry and other high-speed digital systems, 3M has developed a single-mode SC 8° angle-polished connector to minimize to a mean of -80 dB. FREQUENCY 20 15 10 30 25 20 15 10 -65- 66 -67-68-69 -70-71 -72 -73 -74 -75 -76-77 -78 -79-80-81-82-83-84-85 for SC Connectors Ordering Guide Product Number Field-mountable connectors Single-mode/Epoxy 126µm Single-mode/Epoxy 127µm Single-mode/Hot Melt 126µm Single-mode APC Epoxy 126µm Single-mode Low EMI blue boot Single-mode Low EMI white boot Single-mode Crimplok 126µm Multimode/Epoxy 125µm Multimode/Hot Melt 125µm Multimode Low EMI beige boot Multimode Low EMI white boot Multimode Crimplok 125µm 8306 8307 8300 8306-APC 8309-U 8309-W 8900 6306 6300 6309-BE 6309-W 6900 Cable assembly* Single-mode, connector code Single-mode, 8° angle Single-mode Low EMI Multimode, connector code Multimode Low EMI Couplings Single-mode simplex Single-mode duplex Single-mode APC Multimode simplex Multimode duplex 8310 8313 8310-G 6310 6313 Complete universal termination kits Single-mode and Multimode ST, SC & FC Termination Kit, 120V Oven, Epoxy Single-mode and Multimode ST, SC & FC Termination Kit, 230V Oven, Epoxy SC Angled Polished Connector Conversion Kit Hot Melt Fiber Optic Termination Kit, ST, SC & FC 120V Oven Hot Melt Fiber Optic Termination Kit, ST, SC & FC, 230V Oven Crimplok Fiber Optic Termination Kit ST & SC Single-mode & Multimode 8365 8361 8366 6355 6351 6955 * Please refer to cable assembly ordering guide, or price book for complete part numbers Ordering Information To order, specify the correct product number from the Ordering Guide chart. For more information, please contact a 3M sales representative 3M and Crimplok are trademarks of 3M. Packaging 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 1/cs. 1/pkg., 1/cs. 1/pkg., 1/cs. 1/pkg., 1/cs. 1/pkg., 1/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/each, 1/cs. 1/each, 1/cs. 1/each, 1/cs. 1/each, 1/cs. 1/each, 1/cs. 1/each, 1/cs. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized of 3M. Telecommunications 6801 River Place Blvd. Austin, TX 78726-9000 800/426 8688 FAX 800/626 0329 Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of one year from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Recycled Paper 40% Pre-consumer 10% Post-consumer Litho in USA. 3M IPC 2001 80-6111-3107-1

PDF Datasheet Preview

SC Connectors and Accessories

A Family of SC Connectors
3M offers a full line of SC Connectors, including Epoxy, Hot Melt, Crimplok , Low EMI, and Angled Polished Connectors, to meet all your connector needs. 3M has the design of the SC Connector to enhance performance and cable retention and provide readily mountable connectors.

The connector is fully compliant with NTT, JIS, ISO/IEC and TIA/EIA component and ISO/IEC, CENELEC, ANSI, TIA/EIA-568A and BICSI system and cabling level standards. The 3M SC Connector has a rectangular push-pull coupling mechanism for easy insertion and high repeatability. The zirconia ceramic ferrule, with a proprietary PC assures low attenuation and can now minimize power to dB on factory polished single-mode cable assemblies.

The SC Connector is designed for the most advanced optic systems requiring exceptional stability, low single-mode and high density. This versatile connector offers easy installation in both long and short transmission lines, subscriber networks or premises environments.

The 3M Field-Mountable Connector maximizes termination yield through ease of mounting and a high performance polishing procedure. The extended ferrule collar assembly ensures that the adhesive encapsulates the end of the buffer without wicking or spreading. The four-piece design connector, shell, crimp ring and boot is mounted using the same simple process used for other 3M connectors.

The 3M SC Low EMI Connector has unique material, which minimizes electromagnetic interference for routers and switches and test bed applications.

The SC Epoxy and Low EMI Connectors are available in single-mode
and multimode utilizing epoxy adhesive. The SC Hot Melt Connector, available in single-mode and multimode, is preloaded with Hot-Melt adhesive, enabling a termination in less than two minutes for multiple terminations.

The SC Crimplok Connector, also available in both single-mode and multimode, combines the speed of non-adhesive connectors with the performance characteristics of epoxy and hot melt connectors.

The SC Hot Melt and Crimplok Connectors are intended for ease of termination in local area network and meet requirements of system and cabling level standards.
3M also offers the following to help ensure you meet any and all of your connector needs.

A variety of distribution units are available to accommodate the SC design.

For high cable assembly applications, try the 3M Fiber Optic Bulk Pack. Consisting of 1,000 connectors, boots and accessories, the 3M Bulk Pack dramatically decreases assembly time and cost.
3M offers a standard boot, as well as shorter boots for high density, space applications.
mm boots for smaller jacket sizes ranging from mm to mm and buffer boots for 900 µm buffered are also available.

SC Connector

SC Hot Melt Connector

All 3M SC Connectors are available without the 3M logo for private labeling.

SC Connectors and Cable Assemblies

Features Intermateable within NTT Push pull mating Pull-proof independent ferrule 3M PC Zirconia ceramic ferrule

Thermoplastic shell Fewer parts

Hot Melt Version Only in addition to above Pre-loaded Hot Melt adhesive No waiting for epoxy to cure Single step polish

No compatibility issues High density, repeatable connections Maintains optical contact Excellent transmission performance Reduces problems Factory polish to dB single-mode epoxy only * Field polish to dB single-mode epoxy only * Corrosion resistant Fast, simple termination

Extended shelf life, fewer consumables saves money Termination in 2 minutes productivity Only one abrasive to buy faster polishing reduces cost
short boot available

Single-Mode Epoxy Insertion Loss dB
0 -56

Single-Mode Epoxy Reflection dB

FREQUENCY

SC 8° Angled PC Cable Assemblies
8° Angle polish on ferrule patents issued US 5,351,327, US 5,458,582, US 5,321,784

Contacting Isolated ferrule design Push-pull mating SC Zirconia ceramic ferrule Thermoplastic shell

Low mated or unmated intermateable with other SC 8° angled connectors meeting industry standards Low, stable insertion loss Not affected by cable disturbance High density, repeatable connections Durable, compliant material Corrosion resistant

SC 8° Angled PC Cable Assemblies, Single-mode

In order to meet the system requirements of the cable TV industry and other high-speed digital systems, 3M has developed a single-mode SC 8° angle-polished connector to minimize to a mean of -80 dB.

FREQUENCY
20 15 10
30 25 20 15 10
-65- 66 -67-68-69 -70-71 -72 -73 -74 -75 -76-77 -78 -79-80-81-82-83-84-85
for SC Connectors
Ordering Guide

Product Number

Field-mountable connectors

Single-mode/Epoxy 126µm Single-mode/Epoxy 127µm Single-mode/Hot Melt 126µm Single-mode APC Epoxy 126µm Single-mode Low EMI blue boot Single-mode Low EMI white boot Single-mode Crimplok 126µm Multimode/Epoxy 125µm Multimode/Hot Melt 125µm Multimode Low EMI beige boot Multimode Low EMI white boot Multimode Crimplok 125µm
8306 8307 8300 8306-APC 8309-U 8309-W 8900 6306 6300 6309-BE 6309-W 6900

Cable assembly*

Single-mode, connector code

Single-mode, 8° angle

Single-mode Low EMI

Multimode, connector code

Multimode Low EMI

Couplings

Single-mode simplex Single-mode duplex Single-mode APC Multimode simplex Multimode duplex
8310 8313 8310-G 6310 6313

Complete universal termination kits

Single-mode and Multimode ST, SC & FC Termination Kit, 120V Oven, Epoxy

Single-mode and Multimode ST, SC & FC Termination Kit, 230V Oven, Epoxy

SC Angled Polished Connector Conversion Kit Hot Melt Fiber Optic Termination Kit,

ST, SC & FC 120V Oven Hot Melt Fiber Optic Termination Kit,

ST, SC & FC, 230V Oven Crimplok Fiber Optic Termination Kit

ST & SC Single-mode & Multimode
8365
8361 8366 6355 6351 6955
* Please refer to cable assembly ordering guide, or price book for complete part numbers
Ordering Information
To order, specify the correct product number from the Ordering Guide chart. For more information, please contact a 3M sales representative
3M and Crimplok are trademarks of 3M.

Packaging
1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs.
1/pkg., 1/cs. 1/pkg., 1/cs. 1/pkg., 1/cs. 1/pkg., 1/cs. 1/pkg., 1/cs.
1/pkg., 60/cs. 1/pkg., 60/cs. 1/pkg., 60/cs.
1/each, 1/cs.
1/each, 1/cs. 1/each, 1/cs.
1/each, 1/cs.
1/each, 1/cs.
1/each, 1/cs.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized of 3M.

Telecommunications
6801 River Place Blvd. Austin, TX 78726-9000 800/426 8688 FAX 800/626 0329

Warranty Limited Remedy Limited Liability.

This product will be free from defects in material and manufacture for a period of one year from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted.

Recycled Paper 40% Pre-consumer 10% Post-consumer

Litho in USA. 3M IPC 2001 80-6111-3107-1

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 8310-G Datasheet file may be downloaded here without warranties.

Datasheet ID: 8310-G 521374