MP2-H192-44S2-S-KR

MP2-H192-44S2-S-KR Datasheet


MP2 Series

Part Datasheet
MP2-H192-44S2-S-KR MP2-H192-44S2-S-KR MP2-H192-44S2-S-KR (pdf)
Related Parts Information
MP2-H096-41P5-S-KV MP2-H096-41P5-S-KV MP2-H096-41P5-S-KV
MP2-H030-54P1-S-FJ MP2-H030-54P1-S-FJ MP2-H030-54P1-S-FJ
MP2-H060-54P5-S-KV MP2-H060-54P5-S-KV MP2-H060-54P5-S-KV
MP2-H096-44S2-S-KR MP2-H096-44S2-S-KR MP2-H096-44S2-S-KR
MP2-H024-41S1-S-FJ MP2-H024-41S1-S-FJ MP2-H024-41S1-S-FJ
MP2-H024-41S2-S-FJ MP2-H024-41S2-S-FJ MP2-H024-41S2-S-FJ
MP2-H030-54P5-S-TR30 MP2-H030-54P5-S-TR30 MP2-H030-54P5-S-TR30
MP2-H192-44S2-S-TR30 MP2-H192-44S2-S-TR30 MP2-H192-44S2-S-TR30
MP2-H120-54P5-S-TR30 MP2-H120-54P5-S-TR30 MP2-H120-54P5-S-TR30
MP2-H300-51S2-S-TR30 MP2-H300-51S2-S-TR30 MP2-H300-51S2-S-TR30
MP2-H096-44S2-S-TR30 MP2-H096-44S2-S-TR30 MP2-H096-44S2-S-TR30
PDF Datasheet Preview
3M MetPak 2-FB Header
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin

MP2 Series

Solder Tail
• End-to-end stackable
• Select load capability
• Monoblockable
• Shoulder Pin

Press Fit
• End-to-end stackable
• Early mate late break for hot swapping press-fit EMLB adjusted by application tooling
• Select load capability
• Monoblockable
• Push-on shoulder pin
• Optional feed-through tail for rear plug-up midplane applications
• Accepts Universal Tooling
• RoHS Compliant. See the Regulatory Information Appendix RIA in the “RoHS compliance” section of for compliance information RIA E1 & C1 apply

Physical

Date Modified September 9,

Insulation Material High Temp LCP

Flammability UL 94V-0 Color Beige Color:
Material Phosphor Bronze Plating Underplating 50 u” um] Nickel Wiping Area See Ordering Information Solder Tails See Ordering Information

TS-1120-C Sheet 1 of 4

Electrical

Current Rating Signal A - All contacts simultaneously Insulation Resistance 103 MΩ Withstanding Voltage 1,000 VAC

Environmental

Temperature Rating -55°C to +125°C Process Temperature Rating 260°C Profile per J-STD-020C

Moisture Sensitivity Level 1 per J-STD-020C

UL File No. E68080

Electronic Solutions Division Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M MetPak 2-FB Header
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin

MP2 Series

POSITION X

POSITION 2 POSITION 1
4 ROW PRODUCT

FOR SPECIAL MONOBLOCKS AND PIN ARRANGEMENTS CONTACT 3M SALES REPRESENTATIVE
[inch]

Tolerance Unless Noted
mm ±3
[ ] Dimensions for Reference Only

MATING LENGTH
"B" TAIL LENGTH

EDCBA ROW
5 ROW PRODUCT

SOLDER TAIL PRODUCT

PRESS-FIT PRODUCT

Note:

Refer to IEC 61076-4-104 global standard.
“Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical connection with a plated through-hole PTH in a printed circuit board, typically a “back plane.”

PRESS-FIT PRODUCT REAR PLUG-UP
Ordering Information

MP2 - HXXX - XXXX - S -

H = Header

Pin Count See Table 1

Rows 4 = 4 Rows 5 = 5 Rows

Loading Pattern See Table 2

Termination Style P = Press-Fit S = Solder Tail

Tail Length See Table 3

Plating Options See Table 4

Shouldered Pins

TS-1120-C Sheet 2 of 4

Electronic Solutions Division Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M MetPak 2-FB Header
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin

MP2 Series

Table 1 - Connector & Row Lengths

Pin Count

Dim. “A” mm [inch]

Dim “C” mm [inch]

Rows

Table 3 - Tail Length Options

Termination Option No.

Dim. “B”

Solder Tail Press-Fit* Tail
5 Contact 3M
7 Contact 3M
*Compliant-Pin Tail

Table 4 - Plating Options

Plating Press-Fit Solder

Suffix Tails*

Tails

Plating Composition

TG TG30 TR30 TR40B

FJ KR RF LR

PD KV

RIA E2 & C2 apply RIA E2 & C2 apply RIA E2 & C2 apply RIA E2 & C2 apply RIA E1 & C1 apply RIA E1 & C1 apply RIA E1 & C1 apply RIA E1 & C1 apply

RIA E1 & C1 apply RIA E1 & C1 apply

RIA E3 & C2 apply RIA E3 & C2 apply RIA E3 & C2 apply RIA E3 & C2 apply RIA E1 & C1 apply RIA E1 & C1 apply RIA E1 & C1 apply RIA E1 & C1 apply

RIA E1 & C1 apply RIA E1 & C1 apply
um [10 u”] Min. Au Contact Area um [100 u”] Min. SnPb Tail Area um [50 u”] Min. Ni all over um [30 u”] Min. Au Contact Area um [100 u”] Min. SnPb Tail Area um [50 u”] Min. Ni all over um [3 u”] Min. Au Contact Area um [27 u”] Min. PdNi Contact Area um [100 u”] Min. SnPb Tail Area um [50 u”] Min. Ni all over um [5 u”] Min. Hard Au Contact Area, Lubricated um [40 u”] Min. PdNi Contact Area um [4 u”] Min. Pd Contact Area um [100 u”] Min. SnPb Tail Area um [50 u”] Min. Ni all over um [10 u”] Min. Au Contact Area um [200 u”] Min. Matt Whisker Mitigating Sn Tail Area um [50 u”] Min. Ni all over um [30 u”] Min. Au Contact Area um [200 u”] Min. Matt Whisker Mitigating Sn Tail Area um [50 u”] Min. Ni all over um [50 u”] Min. Au Contact Area, Lubricated um [200 u”] Min. Matt Whisker Mitigating Sn Tail Area um [50 u”] Min. Ni all over um [3 u”] Min. Au Contact Area um [27 u”] Min. PdNi Contact Area um [200 u”] Min. Matt Whisker Mitigating Sn Tail Area um [50 u”] Min. Ni all over um [5 u”] Min. Hard Au Contact Area, Lubricated um [40 u”] Min. PdNi Contact Area um [4 u”] Min. Pd Contact Area um [200 u”] Min. Matt Whisker Mitigating Sn Tail Area um [30 u”] Min. Au Dual Contact Areas um [4 u”] Min. Au Needle Eye um [50 u”] Min. Ni all over

Loading Pattern Code
4 5 6 7 8 9 A B C D E G H J K

Table 2 - Mate Length vs. Loading Pattern

Mate length Row A

Mate length Row B

Mate length Row C

All Positions Filled

All Positions Filled

All Positions Filled

All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled

Mate length Row D
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M MetPak 2-FB Header
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin

MP2 Series
"C" 0
"D" PLATED THRU HOLE Ø
00 0 M I N

UNPLATED

CENTER HOLES OPTIONAL FOR 3M PRODUCT

RECOMMENDED 4 ROW SOLDER TAIL PCB HOLE MOUNTING PATTERN
"D " P LA TE D T H R U H O LE Ø 0

RECOMMENDED 4 ROW PRESS-FIT

HOLE “D”

Table 5 -- HOLE PLATING For TG, TG30, TR30, TR40B FINISHES ONLY

Finished Dia. mm [in] Cu Thickness mm [in] SnPb Thickness microns [u”] Drilled Hole Dia. mm [in]
min.
15 [600] max.

Hole “D”

Finished Dia. mm [in]

Table 6 -- HOLE PLATING For FJ, KR, RF, LR, and PD FINISHES ONLY

Cu Thickness mm [in]

Immersion Matte Sn Thickness microns [u”]

Electrolitic Au Thickness
microns [u”]

OSP ENTEK Thickness microns [u”]

Drilled Hole Dia. mm [in]
- [20 - 100]
- [4 - 20]
- [8 - 20]
or 0.85mm [ #66] TWIST DRILL
"D" PLATE D THRU HOLE Ø

UNPLATED
"D" PLATED THRU HOLE Ø

CENTER HOLES OPTIONAL FOR 3M PRODUCT

RECOMMENDED 5 ROW SOLDER TAIL PCB HOLE MOUNTING PATTERN

Electronic Solutions Division Interconnect Solutions

RECOMMENDED 5 ROW PRESS-FIT PCB HOLE MOUNTING PATTERN

TS-1120-C Sheet 4 of 4
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized of 3M.

Warranty Limited Remedy Limited Liability.

This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373

Please recycle. Printed in USA. 3M All rights reserved. RIA-2217B-E
3M is a trademark of 3M Company.
More datasheets: MP2-H030-54P1-S-FJ | MP2-H060-54P5-S-KV | MP2-H096-44S2-S-KR | MP2-H024-41S1-S-FJ | MP2-H024-41S2-S-FJ | MP2-H030-54P5-S-TR30 | MP2-H192-44S2-S-TR30 | MP2-H120-54P5-S-TR30 | MP2-H300-51S2-S-TR30 | MP2-H096-44S2-S-TR30


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MP2-H192-44S2-S-KR Datasheet file may be downloaded here without warranties.

Datasheet ID: MP2-H192-44S2-S-KR 520752