HSHM-S095B1-5AP1-TR40B

HSHM-S095B1-5AP1-TR40B Datasheet


3M MetPak HSHM Press-Fit Socket

Part Datasheet
HSHM-S095B1-5AP1-TR40B HSHM-S095B1-5AP1-TR40B HSHM-S095B1-5AP1-TR40B (pdf)
Related Parts Information
HSHM-S095B4-5AP1-TR40B HSHM-S095B4-5AP1-TR40B HSHM-S095B4-5AP1-TR40B
PDF Datasheet Preview
3M MetPak HSHM Press-Fit Socket
2 mm Type B19, 95 Signal Contacts, 5 Rows, Right Angle

HSHM Series
• Up to 5 Gb/s data rates
• Low crosstalk at high frequencies
• 50/100 single-ended /differential impedance
• Modular/scalable format IEC 61076-4-101
• 63 mated lines per linear inch
• Dual beam contact construction for high reliability
• End-to-end stackable with 5 row 3M MetPak CP2, HM and HSHM sockets
• Mates with 3M MetPak HSHM headers
• See Regulatory Information Appendix RIA for
chemical compliance information

Date Modified August 22, 2007

TS-2221-B Sheet 1 of 3

Physical

Insulation Material High Temperature Thermoplastic LCP

Flammability UL 94V-0 Contact Material Copper Alloy Plating TR30 or TR40B

Performance

Mechanical Normal Force Nominal N [ 58 g ] Signal, N [ 75 g ] Shield Engagement Force Nominal N [ 33 g ] Signal, N [ 22 g ] Shield Separation Force Nominal N [ 20 g ] Signal, N [ 20 g ] Shield Wipe Nominal, Shortest Contact mm [ in. ] Signal, mm [ in ] Shield

Durability 250 cycles with TR40B plating Application This module is not suitable for stand-alone use

Electrical Data Rate 5 Gb/s Characteristic Impedance 50 Single-ended, 100 Differential Current Rating Fully Loaded 1 A at 70° C Signal Insulation Resistance 104 at 100 VDC Withstanding Voltage 750 VRMS

Environmental

Temperature Rating -55°C to 125°C

UL File No. E68080

MetPak is a trademark of 3M Company.
3 Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M MetPak HSHM Press-Fit Socket
2 mm Type B19, 95 Signal Contacts, 5 Rows, Right Angle

HSHM Series
Ordering Information
[inch]

Tolerance Unless Noted
mm ±3
[ ] Dimensions for Reference Only

HSHM - S095BX - 5AP1 -

High Speed Option 1 = Row differential applications 4 = Coaxial and column differential applications 7 = Stripline applications 75
3 Interconnect Solutions

Plating µm [ µ" ] TG30 = [ 30 ] Min. Au Contact Area
[ 100 ] Min. SnPb Terminal Area [ 50 ] Min. Ni All over RIA E2 & C2 apply

TR40B = [ 5 ] Min. Hard Au Contact Area [ 40 ] Min. PdNi Contact Area [ 4 ] Min. Pd Strike Contact Area [ 100 ] Min. SnPb Terminal Area [ 50 ] Min. Ni all over RIA E2 & C2 apply

TS-2221-B Sheet 2 of 3
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M MetPak HSHM Press-Fit Socket
2 mm Type B19, 95 Signal Contacts, 5 Rows, Right Angle

HSHM Series

FINISHED HOLE DIA. "D" - -

HOLE PLATING TABLE mm [in.]

Cu. THICKNESS

SnPb THICKNESS

DRILLED HOLE DIA. - -
3 Interconnect Solutions

TS-2221-B Sheet 3 of 3
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373

Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect

EUROPE Appendix E1 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217B-b

CHINA Appendix C1 China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2 China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty Limited Remedy Limited Liability.

This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3M Electronics Interconnect Products 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373

Please recycle. Printed in USA. 3M All rights reserved. RIA-2217B-b
3M is a trademark of 3M Company.
More datasheets: LFR-206G28V | LFR-206R12V | LFR-206R28V | LFR-206WW12V | LFR-206WW28V | LFR-206Y12V | LFR-206Y28V | LFR-206CW12V | LFR-206CW28V | HSHM-S095B4-5AP1-TR40B


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HSHM-S095B1-5AP1-TR40B Datasheet file may be downloaded here without warranties.

Datasheet ID: HSHM-S095B1-5AP1-TR40B 520423