DIN-120CSC-S1L-TR

DIN-120CSC-S1L-TR Datasheet


3M DIN C-Form Socket

Part Datasheet
DIN-120CSC-S1L-TR DIN-120CSC-S1L-TR DIN-120CSC-S1L-TR (pdf)
Related Parts Information
DIN-048CSC-PSL-SH DIN-048CSC-PSL-SH DIN-048CSC-PSL-SH
DIN-048CSC-S1L-TR DIN-048CSC-S1L-TR DIN-048CSC-S1L-TR
DIN-096CPC-SR2-TR DIN-096CPC-SR2-TR DIN-096CPC-SR2-TR
DIN-096CPC-SR2-TG30 DIN-096CPC-SR2-TG30 DIN-096CPC-SR2-TG30
DIN-096CPC-RR2-TR DIN-096CPC-RR2-TR DIN-096CPC-RR2-TR
DIN-048CSC-PSL-TR DIN-048CSC-PSL-TR DIN-048CSC-PSL-TR
DIN-048CSC-PW1-GG30 DIN-048CSC-PW1-GG30 DIN-048CSC-PW1-GG30
DIN-048CSC-PW1-TR DIN-048CSC-PW1-TR DIN-048CSC-PW1-TR
DIN-048CSC-PW2-RR DIN-048CSC-PW2-RR DIN-048CSC-PW2-RR
DIN-048CSC-R1L-TR DIN-048CSC-R1L-TR DIN-048CSC-R1L-TR
DIN-100CSB-PSL-TR DIN-100CSB-PSL-TR DIN-100CSB-PSL-TR
DIN-048CSC-S1-TG30 DIN-048CSC-S1-TG30 DIN-048CSC-S1-TG30
DIN-048CSC-S1-TR DIN-048CSC-S1-TR DIN-048CSC-S1-TR
DIN-048CSC-S3L-TR DIN-048CSC-S3L-TR DIN-048CSC-S3L-TR
DIN-120CPC-RR1L-TR DIN-120CPC-RR1L-TR DIN-120CPC-RR1L-TR
DIN-064CPB-RR2-TG30 DIN-064CPB-RR2-TG30 DIN-064CPB-RR2-TG30
DIN-048CSC-R1-TR DIN-048CSC-R1-TR DIN-048CSC-R1-TR
DIN-120CPC-SR1-TR DIN-120CPC-SR1-TR DIN-120CPC-SR1-TR
DIN-064CPB-SR2-TR DIN-064CPB-SR2-TR DIN-064CPB-SR2-TR
DIN-064CPB-SR1-TG30 DIN-064CPB-SR1-TG30 DIN-064CPB-SR1-TG30
DIN-064CPB-RR1-TR DIN-064CPB-RR1-TR DIN-064CPB-RR1-TR
DIN-064CPB-SR1-TR DIN-064CPB-SR1-TR DIN-064CPB-SR1-TR
DIN-064CSB-PW1-HM DIN-064CSB-PW1-HM DIN-064CSB-PW1-HM
DIN-048CSC-R1L-KR DIN-048CSC-R1L-KR DIN-048CSC-R1L-KR
PDF Datasheet Preview
3M DIN C-Form Socket

Standard Mount, Vertical, Solder Tail or Press-Fit Termination DIN
41612 Series
• Multi-pin count socket for VME, Multibus II, and VXI backpanels
• Press-fit or solder tail terminals for PCB
• Expanded pin counts
• Optional retention clips
• Mates with C-form and R-form plugs
• See Regulatory Information Appendix RIA for chemical
compliance information

Physical

Date Modified October 28,

Insulation Material Glass Filled Polyester PCT

Flammability UL94V-0 Color Gray or Black
Contact Material Copper Alloy Plating Underplating 50 u” [ um ] Min. Nickel Wiping Area See Ordering Information Termination Area See Ordering Information Marking Part Number and Date Code

Electrical

Contact Resistance 20 mΩ Max. Current Rating A 30°C T-rise above ambient

Insulation Resistance 1 x 103 MΩ min. at 500 VDC Withstanding Voltage 1 x 103 VAC for 1 minute

Environmental

Temperature Rating -55°C to +125°C Process Temperature Rating 260°C per J-STD-020C

Moisture Sensitivity Level 1 per J-STD-020C

TS-1131-C Sheet 1 of 4

UL File No. E68080
3 Electronic Solutions Division Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M DIN C-Form Socket

Standard Mount, Vertical, Solder Tail or Press-Fit Termination DIN

TYP.

PRESS-FIT OR SOLDER TAIL

TYP. E

POSITION A1

C TAIL LENGTH

TYP.

Inch [mm] Tolerance Unless Noted Inch ± ± ± [ ] Dimensions for Reference only
Ordering Information

Au FINISH Feed/Thru Wire Strap W, PW1 and PW2 with RR and GG30 Finish

Au both ends

DIN-XXX CS X-XXX-XXXX
41612 Series

Contact Quantity See Table 1

Plating and Insulating Color Options See Table 3

Contact Loading A = A Row only B = Rows A & C Filled C = Rows A, B, & C Filled D = Rows A & B Filled E = B Row only

Termination Options See table 2

Electronic Solutions Division Interconnect Solutions

TS-1131-C Sheet 2 of 4
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M DIN C-Form Socket

Standard Mount, Vertical, Solder Tail or Press-Fit Termination DIN
41612 Series

Contact Quantity
016 032 048 32 016 032 064 096 064 032 040 080 120 080 040 050 100 150 100 050

Load Pattern

A B C D E A B C D E A B C D E A B C D E

Table 1

SOLDER TERMINATION OPTION No

R1L R3L S1 contact thickness solder tail = 25mil S1L contact thickness solder tail =14mil S3L W PRESS-FIT TERMINATION OPTION No

PSL PW1 PW2 PS

Table 2 DIM “C” in mm

Comments
with retention clips with retention clips no retention clips no retention clips no retention clips
wire wrap

Plating Suffix Insulator Color

TG30

Gray

Gray

RR GG30

Gray Black

Black

Black

Table 3

Press-Fit Termiantions RIA E2 & C2 apply RIA E2 & C2 apply RIA E2 & C2 apply RIA E2 & C2 apply RIA E1 & C1 apply

RIA E1 & C1 apply

RIA E1 & C1 apply

Solder Tail Terminations RIA E3 & C2 apply RIA E3 & C2 apply

N/A N/A RIA E1 & C1 apply

RIA E1 & C1 apply

RIA E1 & C1 apply

Plating Composition
um [30 u”] Min. Au Contact Area um [100 u”] Min. SnPb Tail Area um [50 u”] Min. Ni all over
um [3 u”] Min. Au Contact Area um [7 u”] Min. PdNi Contact Area um [100 u”] Min. SnPb Tail Area um [50 u”] Min. Ni all over
um [3 u”] Min. Au over um [7 u”] Min. PdNi Contact Area each end um [100 u”] Min. SnPb Term. Area um [50 u”] Min. Ni all over
um [30 u”] Min. Au Contact Area each end um [100 u”] Min. SnPb Term. Area um [50 u”] Min. Ni all over
um [30 u”] Min. Au Contact Area um [200 u”] Min. Reflowed Matte Whisker Mitigating Sn Term. Area um [50 u”] Min. Ni all over
um [3 u”] Min. Au over um [7 u”] Min. PdNi Contact Area um [200 u”] Min. Reflowed Matte Whisker Mitigating Sn Term. Area um [50 u”] Min. Ni all over
um [10 u”] Min. Au Contact Area um [200 u”] Min. Reflowed Matte Whisker Mitigating Sn Term. Area um [50 u”] Min. Ni all over
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M DIN C-Form Socket

Standard Mount, Vertical, Solder Tail or Press-Fit Termination DIN
41612 Series

TYP.
l O M A B C

OF PLATED THROUGH- HOLE
l O M A B C

RECOMMENDED MOUNTING HOLE PATTERN

HOLE “F”

HOLE PLATING TABLE For TG, TR, RR Press-Fit Leads

DRILLED HOLE DIA. in mm

Cu THICKNESS in mm SnPb THICKNESS uin um

FINISHED DIA. in mm - -

HOLE “F”

HOLE PLATING TABLE For TG, TR, RR Solder Tail Leads

DRILLED HOLE DIA. in mm

Cu THICKNESS in mm SnPb THICKNESS uin um

FINISHED DIA. in mm - -

HOLE “F”

HOLE PLATING TABLE For MH, HS and KT Press-Fit Leads

DRILLED HOLE DIA. in mm

Cu THICKNESS in mm

Immersion Whisker Mitigating Matte Sn Thickness uin um
#57 OR 1.10mm TWIST DRILL
20 - 100 -

FINISHED DIA. in mm - -

HOLE “F”

HOLE PLATING TABLE For MH, HS, and KT Solder Tail Leads

DRILLED HOLE DIA. in mm

Cu THICKNESS in mm

Immersion Matte Sn Thickness uin um

FINISHED DIA. in mm - -

Electronic Solutions Division Interconnect Solutions

TS-1131-C Sheet 4 of 4
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373

Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect

EUROPE Appendix E1 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by EU Court of Justice Decision 2008/C 116/04 This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished products subject to EU RoHS that are placed on the EU market after June 30, Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.

RIA-2217A-E

Appendix E5 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC.

This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

CHINA Appendix C1 China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers excluding decaBDE or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2 China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers excluding decaBDE or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below.

RIA-2217A-E

Appendix C3 China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers excluding decaBDE or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty Limited Remedy Limited Liability.

This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373

Please recycle. Printed in USA. 3M All rights reserved. RIA-2217A-E
3M is a trademark of 3M Company.
More datasheets: DIN-048CSC-S1-TG30 | DIN-048CSC-S1-TR | DIN-048CSC-S3L-TR | DIN-120CPC-RR1L-TR | DIN-064CPB-RR2-TG30 | DIN-048CSC-R1-TR | DIN-120CPC-SR1-TR | DIN-064CPB-SR2-TR | DIN-064CPB-SR1-TG30 | DIN-064CPB-RR1-TR


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DIN-120CSC-S1L-TR Datasheet file may be downloaded here without warranties.

Datasheet ID: DIN-120CSC-S1L-TR 519965