70001200065

70001200065 Datasheet

Part	Datasheet
70001200065	70001200065 (pdf)

Related Parts	Information
70001203655	70001203655
70001203259	70001203259

PDF Datasheet Preview
3M Specular Film Protected - D50A Technical Data Sheet Release A, January 2014 Product Characteristics Typical values for SFP-D50A shown below are based on test data deemed reliable but not warranted, except for those values identified in the Warranted Characteristics section. Product Description 3MTM Specular Film - Protected D50A “SFP-D50A” or “Product” consists of the next generation of 3M’s high performance ultra-high reflectivity film, which is greater than reflective over the full visible spectrum and all incident angles. SFP-D50A is specially formulated to provide significantly increased lifetime when used in high intensity LED light engines over the standard SFP product. The Product also shows significant lifetime improvement over the standard SFP product for UV irradiance stability. SFP D50A is coated with a pressure-sensitive adhesive, and has a release liner for easy attachment. A protective coating on the premask side provides abrasion resistance to allow for mild cleaning. Physical Characteristic Total Thickness with Liners Film and adhesive only Premask Liners Construction Electrical Dielectric Strength Optical Photopic Reflectivity Reflected Color Shift CIE a, b CIE u, v Value in mm, mils in mm, mils in mm, mils in mm, mils 100% polymeric Test Micrometer N/A ± kV ASTM D257/D149 0 ± 2 unit ASTM E1164/E308 ASTM E1164/E308 4000K LED or D65, 2° Observer Recommended End Uses SFP-D50A is particularly well suited as a cavity reflector applique for planar and conical surfaces where attachment with a pressure-sensitive adhesive is desired. The Product is available as a sheet kit and as custom cut shapes. Key Attributes • Superior specular reflectivity at • UV and high intensity LED irradiance stability • Abrasion resistant coating • Nonconductive 100% polymeric film • Cut to custom shapes • Adheres to planar and conical surfaces Operating Temperature Range Up to 105°C. Shrinkage At Operating Temperature Characteristic 105°C, 15 mins Value Test Environmental Performance Optical and physical properties stable under these test conditions: Cycle Cold Temperature Hot Temperature/Dry Hot Temperature/Humid Thermal Shock Total Reflectivity Color Shift Environment/Duration -40°C 1000 hrs 100°C 1000 hrs

PDF Datasheet Preview

3M Specular Film Protected - D50A

Technical Data Sheet

Release A, January 2014

Product Characteristics

Typical values for SFP-D50A shown below are based on test data deemed reliable but not warranted, except for those values identified in the Warranted Characteristics section.

Product Description
3MTM Specular Film - Protected D50A “SFP-D50A” or “Product” consists of the next generation of 3M’s high performance ultra-high reflectivity film, which is greater than reflective over the full visible spectrum and all incident angles. SFP-D50A is specially formulated to provide significantly increased lifetime when used in high intensity LED light engines over the standard SFP product. The Product also shows significant lifetime improvement over the standard SFP product for UV irradiance stability.

SFP D50A is coated with a pressure-sensitive adhesive, and has a release liner for easy attachment. A protective coating on the premask side provides abrasion resistance to allow for mild cleaning.

Physical Characteristic Total Thickness with Liners Film and adhesive only

Premask

Liners

Construction Electrical

Dielectric Strength Optical

Photopic Reflectivity Reflected Color Shift

CIE a*, b* CIE u, v

Value
in mm, mils
in mm, mils
in mm, mils
in mm, mils
100% polymeric

Test Micrometer N/A
± kV ASTM D257/D149
0 ± 2 unit

ASTM E1164/E308

ASTM E1164/E308 4000K LED or D65, 2° Observer

Recommended End Uses

SFP-D50A is particularly well suited as a cavity reflector applique for planar and conical surfaces where attachment with a pressure-sensitive adhesive is desired. The Product is available as a sheet kit and as custom cut shapes.

Key Attributes
• Superior specular reflectivity at
• UV and high intensity LED irradiance stability
• Abrasion resistant coating
• Nonconductive 100% polymeric film
• Cut to custom shapes
• Adheres to planar and conical surfaces

Operating Temperature Range Up to 105°C.

Shrinkage At Operating Temperature

Characteristic 105°C, 15 mins

Value

Test

Environmental Performance

Optical and physical properties stable under these test conditions:

Cycle

Cold Temperature Hot Temperature/Dry Hot Temperature/Humid Thermal Shock Total Reflectivity Color Shift

Environment/Duration
-40°C 1000 hrs 100°C 1000 hrs

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 70001200065 Datasheet file may be downloaded here without warranties.

Datasheet ID: 70001200065 519854