AB7050HF-1SQ-25

AB7050HF-1SQ-25 Datasheet


3M AB7000HF

Part Datasheet
AB7050HF-1SQ-25 AB7050HF-1SQ-25 AB7050HF-1SQ-25 (pdf)
Related Parts Information
AB7020HF AB7020HF AB7020HF
AB7050HF AB7050HF AB7050HF
AB7030HF AB7030HF AB7030HF
AB7010HF AB7010HF AB7010HF
PDF Datasheet Preview
3M AB7000HF

Series EMI Absorber

Data Sheet

February 2009

Agency Approvals & Self Certifications
3M AB7000HF Series EMI Absorber consists of a flexible polymer resin loaded with soft metal flakes. An acrylic pressure-sensitive adhesive allows for easy application.
• Low Halogen version of AB7000 absorber. Meets guidelines set forth in IEC
• Flexible, high permeability magnetic sheets
• One-sided acrylic pressure sensitive adhesive
• Easily die cut into complex shapes

RoHS 2002/95/EC

RoHS Compliant 2002/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2002/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.

AB7000HF absorber is typically used for applications requiring EMI control and signal integrity improvement in the 50MHz to 10 GHz range. It is a broadband EMI absorber designed to work in near-field applications inside and around electronic devices and assemblies. Common applications include reduction of noise and crosstalk inside mobile electronics, reduction of crosstalk and EMI on ribbon cables and flex cables, reduction of radiated IC noise applying absorber directly to the noisy IC , damping of radiation and oscillations inside shields and cavities, and increasing signal integrity on high speed data lines through crosstalk reduction.

Attenuation and Power Loss

Typical Properties

Many factors determine the true attenuation of an electromagnetic interference absorbing material, including shape and thickness, intimacy of substrate contact, smoothness of application surface, strength and frequency of the EMI signal, etc. Since AB7000HF absorber is a near field absorber, attenuation characteristics tend to be very application specific. Power loss characteristics are measured using a 5cm x 5cm square of AB7000HF absorber placed on a microstrip line. The attenuation and noise dampening attained generally increases as the thickness of the material increases.

Not for specifications. Values are typical, not to be considered minimum or maximum. Properties measured at room temperature 73°F ~23°C unless otherwise stated.

Physical Property Test Method

Typical Value

Adhesive Type of Backing Product Number Backing Thickness Adhesive Thickness

Acrylic non-conductive pressure-sensitive adhesive PSA

Polymer resin with magnetic metal flake filler

AB7010HF AB7020HF AB7030HF AB7050HF
0.13mm
0.25mm
0.35mm
0.55mm
0.03mm
0.05mm
0.05mm
0.05mm

Standard packaging
210mm x 297mm

Temperature Range
-25°to 85°C

Surface resistivity ASTM D-257
1x10

Initial Permeability1

Typical Performance2

Refer to S11 attenuation and power loss graphs

Notes 1.This value measured at 1MHz 3M TM K RD-EMC-AB-02. Attenuation is measured by 7mm coaxial verification kit
1 of 2
3M AB7000HF Series EMI Absorber
More datasheets: PBRC-14.31BR07 | PBRC-7.37BR | PBRC-6.96BR03 | PBRC-6.00BR | PBRC-5.64BR | PBRC-3.58BR | PBRC-4.91BR | PBRC-3.68BR | PBRC-4.19BR | 8801


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AB7050HF-1SQ-25 Datasheet file may be downloaded here without warranties.

Datasheet ID: AB7050HF-1SQ-25 519720