929 Series
Part | Datasheet |
---|---|
![]() |
929971-01-06 (pdf) |
Related Parts | Information |
---|---|
![]() |
929972-01-12 |
![]() |
929971-01-32 |
![]() |
929971-01-14 |
![]() |
929971-01-10 |
![]() |
929972-01-06 |
![]() |
929971-01-20 |
![]() |
929972-01-07 |
![]() |
929972-01-08 |
![]() |
929972-01-10 |
![]() |
929972-01-20 |
![]() |
929972-01-21 |
![]() |
929972-01-40 |
![]() |
929971-01-40 |
![]() |
929972-01-11 |
![]() |
929971-01-08 |
PDF Datasheet Preview |
---|
Pak 100 Thru-Board Socket and x Straight, Solder Tails 929 Series S 3-40 contacts on one row, 4-80 on two row S Single hole board preparation simplifies board layout S No solder mask preparation speeds manufacturing assembly S Top mounting allows single pass for wave soldering Date Modified:May 30, 2003 Physical Insulation Material Glass Filled Polyester PET Flammability UL 94V-0 Color Gray Contact Material Copper Alloy Plating Underplating and U-Slot 100 [ µm ] Nickel QQ-N-290, Class 2 Wiping Area Options See Ordering Information Solder Tails 100 [ µm ] Tin Lead MIL-P-81728 Electrical Current Rating 2 A Insulation Resistance > 1 x 109 500 Vdc Withstanding Voltage 1000 Vrms at Sea Level Environmental Temperature Rating - 55°C to 105°C TS-0814-02 Sheet 1 of 2 UL File No. E68080 Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Pak 100 Thru-Board Socket and x Straight, Solder Tails 929 Series [ ] Ref [ ] [ ] X Typ [ X ] Recommended Solder Flow Direction Sq Typ [ ] Recommended Solder Flow Direction Sq Typ [ ] Ref [ ] Integral Solder Mask Plugs See Note 1 Ref [ ] See Note 1 ± [ ] Typ [ ] Pad Size Typ [ ] See Note 1 Typ [ ] Pad Size ± [ ] Typ [ ] Pad Size Typ [ ] Pad Size Recommended Mounting Hole Pattern Contact Quantity One Row Two Row Dimension A [ ] - [ - ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] Notes It is recommended that the plated thru-hole on the ends be to this will prevent the connector from floating during the wave soldering process. Integral solder mask plugs are removed after soldering by using the 3M Hand Tool 929013 with the 3M Molded Head 929025-0X-XX or 3M Hand Tool 929012 with the 3M Press Do not hand solder this connector because the solder heat and volume of solder cannot be adequately controlled. This would make the integral plugs difficult or impossible to remove. The connector should be flow soldered such that it enters the solder wave, end first width . Request tech brief for proper application usage. Inch [mm] Tolerance Unless Noted Inch ± ± ± [ ] Dimensions for Reference only Ordering Information 929XXX-01-XX-XX Plating Options: 1 Row 841 = Gold 971 = 100 [ µm] Tin Lead 2 Row 842 = Gold 972 = 100 [ µm] Tin Lead Contact Quantity per row See Table Gold Plating Thickness 10 = Wiping Area10 [ µm ] Gold 30 = Wiping Area 30 [ µm ] Gold No entry required for Tin Lead plating TS-0814-02 Sheet 2 of 2 Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized of 3M. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of 1 year from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electronic and Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 3M 2003 |
More datasheets: VAOM-C07573S9-BW/32 | VAOM-A07573S9-BW/32 | 929972-01-12 | 929971-01-32 | 929971-01-14 | 929971-01-10 | 929972-01-06 | 929971-01-20 | 929972-01-07 | 929972-01-08 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 929971-01-06 Datasheet file may be downloaded here without warranties.