94835

94835 Datasheet


Part Datasheet
94835 94835 94835 (pdf)
Related Parts Information
94810 94810 94810
94827 94827 94827
PDF Datasheet Preview
Specialty Terminals
71M-250-32-NBL, 72M-250-32-NBL, 73M-250-32-NBL

Male Disconnect, Nylon Fully Insulated with Insulation Grip

Data Sheet

Wire Range

Product Number
71M-250-32-NBL 22-18
72M-250-32-NBL 16-14
73M-250-32-NBL 12-10

Male Tab

Width W'
x Thickness

Barrel Length

Barrel I.D.

Maximum Insulation Diameter

Installation Information

UNDERWRITERS LABORATORIES STANDARD NO. UL 310 3M FILE NO. E70512

Specifications

Wire Size Barrel Seam:

Maximum Voltage Rating:

Maximum Temperature Rating Maximum Current Insulator Material Terminal Material Insulation Grip Material Plating:

CANADIAN STANDARDS ASSOCIATION STANDARD NO. C22.2 NO. 153 3M FILE NO. LR22190

See Table Above Butted with Insulation Grip 600 V Building Wire 1000 V Signs or Fixtures Luminaires Same as Wire Nylon ETP Copper Brass Tin

WARNING

Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes.

UL Listed and CSA Certified for use on stranded copper AWG wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool TH-440, TH-450 scissor style , or TR-482, TR-490 ratchet style hand tools.

Barrel Crimp Electrical

Insulation Crimp Mechanical

Suitable for factory application on steel or brass tabs UL or CSA. Suitable for field application on brass tabs, strain relief required, UL only.

Engineering Specification

Crimp-Type Male Quick Disconnect shall, electrically and mechanically connect permanently to a prestripped end of a stranded copper wire and, have a flat rectangular tongue portion for mating to a Female Quick Disconnect in a separable, reusable manner, forming a Quick Connect Wiring Connection.

The connector line shall offer tongue variations size x or x per ANSI/NEMA DC-2 and barrel variations in wire size 22-18 AWG, 16-14 AWG, 12-10 AWG and construction of non-insulated, vinyl insulated, nylon fully insulated, etc.

The Quick Disconnect shall have regulatory agency coverage UL Listing, CSA Certification . The tongue shall be marked with the wire range and the manufacturer’s symbol.

The Nylon Fully Insulated Male Quick Disconnect with Insulation Grip shall be tin plated thick copper, with a blade conforming to ANSI/NEMA DC-2 dimensions and a long barrel with a tin plated brass insulation grip covered by a molded nylon funnel entry sleeve which extends to cover the tongue, color coded, and sized for a specified AWG wire range 22-18, 16-14,

Insulated connectors shall be UL Listed and CSA Certified for 600 volts maximum, building wire 1000 volts maximum, signs and fixtures luminaires . The connector shall be temperature rated maximum.

Quick Disconnect connectors shall be suitable for field or factory wiring, with a UL Recognized strain relief required.
3M is a trademark of 3M.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.

IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.

Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted.
More datasheets: AT29C257-12JC-T | AT29C257-12JI-T | AT29C257-15JC-T | AT29C257-70JC-T | AT29C257-70JI-T | AT29C257-90JC-T | FEB173 | DPD090050-P5P-SZ | 94810 | 94827


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 94835 Datasheet file may be downloaded here without warranties.

Datasheet ID: 94835 518624