94814

94814 Datasheet

Part	Datasheet
94814	94814 (pdf)

Related Parts	Information
94797	94797

PDF Datasheet Preview
Specialty Terminals 71F-187-20-NB, 72F-187-20-NB Female Disconnect, Nylon Insulated, Insulation Grip Data Sheet Product Number Wire Range AWG 71F-187-20-NB 22-18 72F-187-20-NB 16-14 Mates with Male Tab Width W' x Thickness Maximum Barrel Insulation Length I.D. Diameter UNDERWRITERS LABORATORIES STANDARD NO. UL 310 3M FILE NO. E70512 CANADIAN STANDARDS ASSOCIATION STANDARD NO. NO. 153 3M FILE NO. LR22190 Specifications Wire Size Barrel Seam: Maximum Voltage Rating: Maximum Operating Temp Maximum Current Insulator Material Terminal Material Insulation Grip Material Plating: See Table Above Butted with Insulation Grip 600V Building Wire 1000 V Signs or Lighting Fixtures Luminaires Same as Wire Nylon Brass Tin Installation Information WARNING Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. UL Listed and CSA Certified for use on stranded copper AWG wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool TH-440, TH-450 scissor style , or TR-482, TR-490 ratchet style hand tools. Barrel Crimp Required Insulation Grip Crimp Recommended Suitable for factory installation on steel or brass tabs, UL and CSA. Suitable for field application on brass tabs, strain relief is required. Engineering Specification Crimp-Type Female Disconnects shall, electrically and mechanically, connect permanently to the prestripped end of a stranded copper wire, and have a tongue portion with fingers which grip a Male Disconnect in a separable, reusable manner, forming a Quick Connect Wiring Termination. The connector line shall offer tongue variations sized to x or x per ANSI/NEMA CD-2 and barrel variations in wire AWG size 22-18, 16-14, 12-10 and construction, non-insulated, nylon-insulated with insulation grip, and nylon fully insulated, etc. The Female Disconnects shall have regulatory agency coverage, UL Listing, CSA Certified. The tongue portion shall be marked with the wire range and manufacturer’s symbol The Nylon Insulated Female Disconnect, with Insulation grip, shall be tin plated thick brass, with a tongue for gripping a Male Tab per ANSI/NEMA CD-2 and a long barrel with a tin plated brass funnel entry insulation grip, covered by a molded nylon sleeve, color coded and sized for a specified AWG wire range 22-18, Insulated connectors shall be UL Listed and CSA Certified for 600 V building wire 1000V signs or lighting fixtures luminaires and temperature rated maximum. Female Disconnects shall be suitable for field or factory wiring, with a UL Recognized strain relief required. 3M is a trademark of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000

PDF Datasheet Preview

Specialty Terminals
71F-187-20-NB, 72F-187-20-NB

Female Disconnect, Nylon Insulated, Insulation Grip

Data Sheet

Product Number

Wire Range AWG
71F-187-20-NB 22-18
72F-187-20-NB 16-14

Mates with Male Tab Width W' x Thickness

Maximum

Barrel Insulation

Length

I.D.

Diameter

UNDERWRITERS LABORATORIES STANDARD NO. UL 310 3M FILE NO. E70512

CANADIAN STANDARDS ASSOCIATION STANDARD NO. NO. 153 3M FILE NO. LR22190

Specifications

Wire Size Barrel Seam:

Maximum Voltage Rating:

Maximum Operating Temp Maximum Current Insulator Material Terminal Material Insulation Grip Material Plating:

See Table Above Butted with Insulation Grip 600V Building Wire 1000 V Signs or Lighting Fixtures Luminaires Same as Wire Nylon Brass Tin

Installation Information

WARNING

Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes.

UL Listed and CSA Certified for use on stranded copper AWG wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool TH-440, TH-450 scissor style , or TR-482, TR-490 ratchet style hand tools.

Barrel Crimp Required

Insulation Grip Crimp Recommended

Suitable for factory installation on steel or brass tabs, UL and CSA. Suitable for field application on brass tabs, strain relief is required.

Engineering Specification

Crimp-Type Female Disconnects shall, electrically and mechanically, connect permanently to the prestripped end of a stranded copper wire, and have a tongue portion with fingers which grip a Male Disconnect in a separable, reusable manner, forming a Quick Connect Wiring Termination.

The connector line shall offer tongue variations sized to x or x per ANSI/NEMA CD-2 and barrel variations in wire AWG size 22-18, 16-14, 12-10 and construction, non-insulated, nylon-insulated with insulation grip, and nylon fully insulated, etc. The Female Disconnects shall have regulatory agency coverage, UL Listing, CSA Certified. The tongue portion shall be marked with the wire range and manufacturer’s symbol

The Nylon Insulated Female Disconnect, with Insulation grip, shall be tin plated thick brass, with a tongue for gripping a Male Tab per ANSI/NEMA CD-2 and a long barrel with a tin plated brass funnel entry insulation grip, covered by a molded nylon sleeve, color coded and sized for a specified AWG wire range 22-18,

Insulated connectors shall be UL Listed and CSA Certified for 600 V building wire 1000V signs or lighting fixtures luminaires and temperature rated maximum.

Female Disconnects shall be suitable for field or factory wiring, with a UL Recognized strain relief required.
3M is a trademark of 3M.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.

IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.

Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted.

Electrical Products Division
6801 River Place Blvd. Austin, TX 78726-9000

More datasheets: 410-338 | 22007 RD005 | ADNS-2620 | 1-NPT/603-1327 | 5365F1;1 | 5365F5;5 | 5365F7;7 | EMINLKIT | FDD2570 | 94797

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 94814 Datasheet file may be downloaded here without warranties.

Datasheet ID: 94814 518560