6850-4500JL

6850-4500JL Datasheet

Part	Datasheet
6850-4500JL	6850-4500JL (pdf)

Related Parts	Information
6840-4500JL	6840-4500JL
6834-4500JL	6834-4500JL

PDF Datasheet Preview
3M Polarized Boardmount Socket x Centerbump Polarization with Straight Solder Tails 6800 Series • Standard centerbump with straight solder tails • Mates with low profile shrouded headers • Part number on each piece • Optional keying plug • 34-50 contacts • Military dual polarization • Board retention feature • RoHS compliant version PL plating available Date Modified September 1, 2005 Physical Insulation Material Glass Filled Polyester PBT Flammability UL 94V-0 Color Gray Contact Material Copper Alloy Plating Underplating and U-Slot 2 µm [ 79 ] Nickel Wiping Area µm [ 12 ] Gold Solder Tails Tin Lead or Gold flash see ordering information Marking 3M Logo, Part Identification Number and Orientation Triangle Electrical Current Rating 1 A Insulation Resistance > 1 x at 500 VDC Withstanding Voltage 1000 Vrms at Sea Level Environmental Temperature Rating -55°C to +105°C TS-0689-04 Sheet 1 of 2 RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or prolybromianted diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. UL File No. E68080 3M Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M Polarized Boardmount Socket x Centerbump Polarization with Straight Solder Tails 6800 Series 68XX A Position 2 Typ [ ] Centerbump Standard [ ] Military Dual Polarization Slots Position 1 Ref [ ] [ ] See Note 1 Triangle Indicates Position 1 Contact Quantity Dimension A Ref [ ] Typ [ ] Recommended Mounting Hole Pattern Shown for Top Side of PC Board 3435 Breakaway Tab 3435-0 Keying Plug Optional Order Separately The contact soldertail is designed to retain the connector on the PC board during flow soldering operations. Recommended to be mated to the x Low Profile Header and the 4600 series Plug Connector without ejector latches. Ordering Information Sockets 68XX-4500XL mm [Inch] Tolerance Unless Noted mm ± ± [ ] Dimensions for Reference only Contact Quantity See Table Tail plating J = Tin-lead P = Gold flash RoHS compliant TS-0689-04 Sheet 2 of 2 3M Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/328-1368 Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. Minimum 10% Post-Consumer Fiber Printed in USA. 3M 2005

PDF Datasheet Preview

3M Polarized Boardmount Socket
x Centerbump Polarization with Straight Solder Tails
6800 Series
• Standard centerbump with straight solder tails
• Mates with low profile shrouded headers
• Part number on each piece
• Optional keying plug
• 34-50 contacts
• Military dual polarization
• Board retention feature
• *RoHS compliant version PL plating available

Date Modified September 1, 2005

Physical

Insulation Material Glass Filled Polyester PBT Flammability UL 94V-0
Color Gray Contact Material Copper Alloy Plating Underplating and U-Slot 2 µm [ 79 ] Nickel Wiping Area µm [ 12 ] Gold Solder Tails Tin Lead or Gold flash see ordering information Marking 3M Logo, Part Identification Number and Orientation Triangle

Electrical

Current Rating 1 A Insulation Resistance > 1 x at 500 VDC Withstanding Voltage 1000 Vrms at Sea Level

Environmental

Temperature Rating -55°C to +105°C

TS-0689-04 Sheet 1 of 2
*RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or prolybromianted diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.

UL File No. E68080
3M Interconnect Solutions
3M is a trademark of 3M Company.
For technical, sales or ordering information call 800-225-5373
3M Polarized Boardmount Socket
x Centerbump Polarization with Straight Solder Tails
6800 Series
68XX

A Position 2

Typ [ ]

Centerbump Standard [ ]

Military Dual Polarization

Slots

Position 1

Ref [ ]
[ ] See Note 1

Triangle Indicates Position 1

Contact Quantity

Dimension A

Ref [ ]

Typ [ ]

Recommended Mounting Hole Pattern Shown for Top Side of PC Board
3435

Breakaway Tab
3435-0 Keying Plug

Optional Order Separately

The contact soldertail is designed to retain the connector on the PC board during flow soldering operations.

Recommended to be mated to the x Low Profile Header and the 4600 series Plug Connector without ejector latches.
Ordering Information

Sockets 68XX-4500XL
mm [Inch]

Tolerance Unless Noted
mm ± ±
[ ] Dimensions for Reference only

Contact Quantity See Table

Tail plating J = Tin-lead P = Gold flash RoHS compliant

TS-0689-04 Sheet 2 of 2
3M Interconnect Solutions
3M is a trademark of 3M Company.
For technical, sales or ordering information call 800-225-5373

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Electronics
6801 River Place Blvd. Austin, TX 78726-9000 800/328-1368

Warranty Limited Remedy Limited Liability.

This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.

Minimum 10% Post-Consumer Fiber

Printed in USA. 3M 2005

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 6850-4500JL Datasheet file may be downloaded here without warranties.

Datasheet ID: 6850-4500JL 518385