N3432-1402RB

N3432-1402RB Datasheet

Part	Datasheet
N3432-1402RB	N3432-1402RB (pdf)

PDF Datasheet Preview
Pak 100 3-Wall Header x Latch/Ejector, Straight and Right Angle, High Temp Option 3000 Series S Military with 3M’s 3518 polarizing key and center bump polarization S Low profile S Optional ejector latches S Mounting holes for securing header to board S Three wall shroud provides design flexibility S Solder tail and wrap tail options S Optional polarizing posts available S High temperature option Date Modified:May 30, 2003 Physical Insulation Material Glass Filled Polyester PBT Glass Filled Polyester PCT High Temp Option Flammability UL 94V-0 Color Gray Beige High Temp Option Contact Material Copper Alloy Plating Underplate 100 [ µm ] Nickel QQ-N-290, Class 2 Wiping Area Gold MIL-G-45204, Type II, Grade C Solder Tails 200 [ µm ] 60/40 Tin Lead MIL-P-81728 Wrap Tails Gold Flash Marking 3M Logo, Part Identification Number and Orientation Triangle Electrical Current Rating 1 A Insulation Resistance >1 x 109 at 500 Vdc Withstanding Voltage 1000 Vrms at Sea Level Environmental Temperature Rating - 55°C to +105°C TS-0771-03 Sheet 1 of 4 UL File No. E68080 Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Pak 100 3-Wall Header x Latch/Ejector, Straight and Right Angle, High Temp Option 3000 Series -X0XX Header with No Ejector/Latch -X5XX Header with Short Ejector/Latch for 3M Sockets without Strain Relief -X6XX Header with Long Ejector/Latch for 3M Sockets with Strain Relief ± [ ] ± [ ] -X4XX Header with Ejector only ± Sq Typ [ ] See Note 2 Note This Ejector is a Nickel Plated Zinc Alloy Casting. “Y” F Typ Section A--A Straight ± Sq Typ [ ] Position 1 Orientation Triangle Ref F Typ CL “Y” Position 1 Notch A See Table 1 & Note1 Notch B See Table 1 Notch C See Table 1 & Note 1 Section B--B Right Angle See Note 2 TS-0771-03 Sheet 2 of 4 Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Pak 100 3-Wall Header x Latch/Ejector, Straight and Right Angle, High Temp Option 3000 Series Pin Quantity 10 14 16 20 26 34 40 50 60 64 3M Part Number 3793 3314 3408 3428 3429 3431 3432 3433 3372 3764 Table 1 Dimensions Polarization Notches Provided BC ABC 3M Part Number Suffix -1XX2 -2XX2 -1X03 -2X03 -3X05 -4X05 Contact Tail Solder Tail for Thick PC Board Solder Tail for to Thick PC Board Wire Wrap Tail for up to 3 Levels of Wire Wrap Dimension E Table 2 Pin Cross Section Dimension F Diagonals Corner Radii Dimension G ± ± See Note 3 ± ± See Note 2 Side to Side Stackability G Dia See Note 2 Max to Edge of PCB for Daisy Chain G Dia “Y” CL “Y” Position 1 Position 1 ± Recommended Mounting Hole Pattern Straight Recommended Mounting Hole Pattern Right Angle Inch For technical, sales or ordering information call 800-225-5373 Pak 100 3-Wall Header x Latch/Ejector, Straight and Right Angle, High Temp Option 3000 Series Ordering Information 30 Microinches Gold Plated Product Blank = Standard N = High Temperature 3M Part Number See Table 1 Latch/Ejector System 0 = No Latch/Ejector 4 = Roll Pin Ejectors 3M Part # 3505-4 5 = Short, Snap-In Latch/Ejectors, 3M Part # 3505-30 6 = Long, Snap-In Latch/Ejectors 3M Part # 3505-31 Tail 02 = Solder Tail for Thick Board K2=Kinked Solder Tails for Thick Board 03 =Solder Tails for to Thick Board 05 = Wrap Posts for up to 3 Levels of Wire Wrap not available on High Temp version Shroud and Pin Configuration 1 = 3 Wall, Right Angle Solder Tail 2 = 3 Wall, Straight Solder Tail 3 = 3 Wall, Right Angle Wrap Post not available on High Temp version 4 = 3 Wall, Straight Wrap Post 15 Microinches Gold Plated Product Plating Suffix UG = 15 microinch Gold Blank = Standard N = High Temperature 3M Part Number See Table 1 Shroud and Pin Configuration 1 = 3 Wall, Right Angle Solder Tail 2 = 3 Wall, Straight Solder Tail Tail 02 = Solder Tail for Thick Board K2=Kinked Solder Tails for Thick Board 03 =Solder Tails for to Thick Board Latch/Ejector System 0 = No Latch/Ejector 5 = Short, Snap In Latch/Ejectors 3M Part # 3505-30 6 = Long, Snap In Latch/Ejectors 3M Part # 3505-31 Interconnect Solutions TS-0771-03 Sheet 4 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized of 3M. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of 1 year from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electronic and Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 3M 2003

PDF Datasheet Preview

Pak 100 3-Wall Header
x Latch/Ejector, Straight and Right Angle, High Temp Option 3000 Series

S Military with 3M’s 3518 polarizing key and center bump polarization

S Low profile S Optional ejector latches S Mounting holes for securing header to board S Three wall shroud provides design flexibility S Solder tail and wrap tail options S Optional polarizing posts available S High temperature option

Date Modified:May 30, 2003

Physical

Insulation Material Glass Filled Polyester PBT Glass Filled Polyester PCT High Temp Option

Flammability UL 94V-0 Color Gray Beige High Temp Option

Contact Material Copper Alloy

Plating Underplate 100 [ µm ] Nickel QQ-N-290, Class 2 Wiping Area Gold MIL-G-45204, Type II, Grade C Solder Tails 200 [ µm ] 60/40 Tin Lead MIL-P-81728 Wrap Tails Gold Flash

Marking 3M Logo, Part Identification Number and Orientation Triangle

Electrical

Current Rating 1 A Insulation Resistance >1 x 109 at 500 Vdc Withstanding Voltage 1000 Vrms at Sea Level

Environmental

Temperature Rating - 55°C to +105°C

TS-0771-03 Sheet 1 of 4

UL File No. E68080

Interconnect Solutions
3M is a trademark of 3M Company.
For technical, sales or ordering information call 800-225-5373

Pak 100 3-Wall Header
x Latch/Ejector, Straight and Right Angle, High Temp Option 3000 Series
-X0XX Header with No

Ejector/Latch
-X5XX Header with Short Ejector/Latch for 3M Sockets without Strain Relief
-X6XX Header with Long Ejector/Latch for 3M Sockets with Strain Relief
± [ ]
± [ ]
-X4XX Header with Ejector only
± Sq Typ [ ]

See Note 2

Note This Ejector is a Nickel Plated Zinc Alloy Casting.
“Y”

F Typ

Section A--A

Straight
± Sq Typ [ ]

Position 1 Orientation

Triangle

Ref F Typ

CL “Y”

Position 1

Notch A See Table 1 & Note1

Notch B See Table 1

Notch C See Table 1 & Note 1

Section B--B

Right Angle

See Note 2

TS-0771-03 Sheet 2 of 4

Interconnect Solutions
3M is a trademark of 3M Company.
For technical, sales or ordering information call 800-225-5373

Pak 100 3-Wall Header
x Latch/Ejector, Straight and Right Angle, High Temp Option 3000 Series

Pin Quantity
10 14 16 20 26 34 40 50 60 64
3M Part Number
3793 3314 3408 3428 3429 3431 3432 3433 3372 3764

Table 1

Dimensions

Polarization Notches Provided BC ABC
3M Part Number Suffix
-1XX2 -2XX2
-1X03 -2X03
-3X05 -4X05

Contact Tail

Solder Tail for

Thick PC Board

Solder Tail for to

Thick PC Board

Wire Wrap Tail for up to 3 Levels of Wire Wrap

Dimension E

Table 2 Pin Cross Section

Dimension F Diagonals Corner Radii

Dimension G
± ±

See Note 3
± ±

See Note 2

Side to Side Stackability G Dia

See Note 2

Max to Edge of PCB for Daisy Chain

G Dia
“Y” CL
“Y”

Position 1

Position 1 ±

Recommended Mounting Hole Pattern

Straight

Recommended Mounting Hole Pattern

Right Angle

Inch
For technical, sales or ordering information call 800-225-5373

Pak 100 3-Wall Header
x Latch/Ejector, Straight and Right Angle, High Temp Option 3000 Series
Ordering Information
30 Microinches Gold Plated Product

Blank = Standard N = High Temperature
3M Part Number See Table 1

Latch/Ejector System 0 = No Latch/Ejector 4 = Roll Pin Ejectors
3M Part # 3505-4 5 = Short, Snap-In Latch/Ejectors,
3M Part # 3505-30 6 = Long, Snap-In Latch/Ejectors
3M Part # 3505-31

Tail 02 = Solder Tail for Thick Board K2=Kinked Solder Tails for

Thick Board 03 =Solder Tails for to

Thick Board 05 = Wrap Posts for up to 3 Levels of Wire Wrap
not available on High Temp version

Shroud and Pin Configuration 1 = 3 Wall, Right Angle

Solder Tail 2 = 3 Wall, Straight Solder Tail 3 = 3 Wall, Right Angle Wrap Post
not available on High Temp version 4 = 3 Wall, Straight Wrap Post
15 Microinches Gold Plated Product

Plating Suffix UG = 15 microinch Gold

Blank = Standard N = High Temperature
3M Part Number See Table 1

Shroud and Pin Configuration 1 = 3 Wall, Right Angle

Solder Tail 2 = 3 Wall, Straight Solder Tail

Tail 02 = Solder Tail for Thick Board K2=Kinked Solder Tails for

Thick Board 03 =Solder Tails for to

Thick Board

Latch/Ejector System 0 = No Latch/Ejector 5 = Short, Snap In Latch/Ejectors
3M Part # 3505-30 6 = Long, Snap In Latch/Ejectors
3M Part # 3505-31

Interconnect Solutions

TS-0771-03 Sheet 4 of 4
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized of 3M.

Warranty Limited Remedy Limited Liability.

This product will be free from defects in material and manufacture for a period of 1 year from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted.

Electronic and Interconnect Solutions Division
6801 River Place Blvd. Austin, TX 78726-9000
3M 2003

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived N3432-1402RB Datasheet file may be downloaded here without warranties.

Datasheet ID: N3432-1402RB 517741