2501
2501 Datasheet
The 3M brand FibrlokTM Optical Fiber Splicing System provides permanent mechanical splices for single or multi mode fiber having 125 µm diameter cladding. Three color coded versions of the Fibrlok Splice are available for splicing 250 µm and 900 µm diameter plastic coated fiber.
| Part | Datasheet |
|---|---|
2501 |
2501 (pdf) |
| PDF Datasheet Preview |
|---|
| Instructions FibrlokTMOptical Fiber Splicing System Issue 6, August 1991 General The 3M brand FibrlokTM Optical Fiber Splicing System provides permanent mechanical splices for single or multi mode fiber having 125 µm diameter cladding. Three color coded versions of the Fibrlok Splice are available for splicing 250 µm and 900 µm diameter plastic coated fiber. The Fibrlok 2525 Splice is for splicing 250 µm fiber to 250 µm fiber: The Fibrlok 2590 Splice is for splicing 250 µm fiber to 900 µm fiber: The Fibrlok 2599 Splice is for splicing 900 µm fiber to 900 µm fiber: Fibrlok Optical Fiber Splice Fiber Size Designation Circles 1/4 circle for 250 µm coating, full circle for 900 µm coated fiber End Plug each end Fiber Entry Port each end Cap Jacket Fibrlok 2501 Assembly Tool Fiber Retention Pad Fiber Alignment Guides 2 Splice Holding Cradle Pivoted Handle shown open Fiber Retention Pad Toggle Arm Toggle Arm Mounting Holes 4 Instruction Label 2 Finger Cutout Tools and Materials Required FibrlokTM 2500 or 2501 Assembly Tool Plastic Coating Buffer Stripper Reagent Grade Isopropyl Alcohol Lint Free Wipes Cleaver Fibrlok 2505 Assembly Tool Mounting Adaptor optional Fibrlok Video Instruction Tape optional Tool Kit optional Compatible Organizers 3M 2118, 3M 2524 AT&T UC-SS/M1 GTE Part 910470 0000, 910470 1000 Siecor M67-070 Others compatible with minor modifications: DiTel UST 3000, UST 3010, UST 3500 AT&T 846 280 626, 846 280 634, 846 280 642, 846 280 659 Raychem FOSC 100/TK Base Fiber Cleave Length Gauge both ends of tool Splicing Set-Up The splicing area should be clean, dry and well-lighted. A clean, well organized splicing area will improve splicing efficiency and minimize the risk of contamination of fibers or splices. Open the buffer tubes, expose and clean the fibers per company practice. Note: Storage, use and disposal of isopropyl alcohol should be per company health and safety instructions. Refer to solvent label or Material Safety Data Sheet. See Section for recommended procedures for fiber organization and splice storage. Remove Fibrlok splice from protective package. Load the splice into the assembly tool by pressing firmly at the ends of the splice. Note Carefully follow health and safety information on Fibrlok Splice label or Material Safety Data Sheet. If using the Fibrlok 2501 Assembly Tool, rotate the toggle arms for the appropriate fiber size. Inward - 250 µm |
| More datasheets: 18056USA | CWR-140-20-0203 | CWR-142-60-0001 | CWR-143-60-0003 | CWR-140-20-0000 | KIT0099 | 422J/2HP | PAFC243B | 810 1/2"X2592" | 810 1/2"X36 YD |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 2501 Datasheet file may be downloaded here without warranties.