2440-5112TB

2440-5112TB Datasheet

Part	Datasheet
2440-5112TB	2440-5112TB (pdf)

PDF Datasheet Preview
and Pin Strip Header Straight & Right Angle, Solder Tail 2400 Series S One and two row versions S Straight and right angle versions S Break to length for faster delivery, lower inventory costs, and faster prototyping S Tapered tip does not cut the socket wipe during insertion, reducing operational failures and repairs S Solder standoffs facilitate wash of flux residue, reducing costly rework S Board pin retention feature available Physical Date Modified December 28, 1999 Insulation Material Glass Filled Polyester PBT Flammability UL 94V-0 Color Gray Contact Material Copper Alloy Plating Underplate 100 [ µm ] Nickel QQ-N-290, Class 2 Wiping Area 30 [ µm ] Gold MIL-G-45204, Type II, Grade C Solder Tails 200 [ µm ] 90/10 Tin Lead MIL-P-81728 Electrical Current Rating 3 A Insulation Resistance > 1 x 109 at 500 Vdc Withstanding Voltage 1000 Vrms at Sea Level Environmental Temperature Rating to +105°C TS-0767-03 Sheet 1 of 3 UL File No. E68080 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373 and Pin Strip Header Straight & Right Angle, Solder Tail 2400 Series Straight See note 1 See Note 1 See Note 2 R Ref [ ] ± [ ] ± [ ] Pin Cross Section See Note 2 ± Typ [ ] Recommended Mounting Hole Pattern Inch [mm] Tolerance Unless Noted Inch ± ± ± [ ] Dimensions for Reference Only Notes; This part is molded in the 40 contact quantity version. Parts that require fewer contacts are broken to length. Dimension “C” is measured from a “Molded End” to the “Center of the Break Point” beyond the desired quantity. On Pin Strips, which have break points on both ends, “C” = x contact quantity per row. The recommended PCB hole size for the kinked tail positions on the solder tail connector is ± Refer to TS-0971 for the number of tails kinked and the position kinked. Pin Quantity One Two Row 02 04 03 06 04 08 05 10 06 12 07 14 08 16 09 18 10 20 11 22 12 24 13 26 14 28 15 30 16 32 17 34 18 36 Ordering Information 24XX-6XXXTB Pin Quantity See Table One Row Two Row Pin Length Dim A 1 = 2 = Tail Dim B One Row Two Row Solder Tails Solder Tails Solder Tails Solder Tails Kinked Solder Tails Kinked Solder Tails Dimension C [ [ [ [ TS-0767-03 Sheet 2 of 3 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373 and Pin Strip Header Straight & Right Angle, Solder Tail 2400 Series Right Angle C See Note 1 See Note 1 ± [ ] B R Ref ± [ ] ± [ ] Pin Cross Section ± [ ] ± [ ] See Note 2 See Note 2 ± Typ [ ] Recommended Mounting Hole Pattern Notes This part is molded in the 40 contact quantity version. Parts that require fewer contacts are broken to length. Dimension “C’’ is measured from a ‘‘Molded End’’ to the ‘‘Center of the Break Point’’ beyond the desired quantity. On Pin Strips, which have break points on both ends, ‘‘C’’ = x contact quantity per row. The recommended PCB hole size for the kinked tail positions on the solder tail connector is ± Refer to for the number of tails kinked and the position kinked. Inch [mm] Tolerance Unless Noted Inch ± ± ± [ ] Dimensions for Reference only Pin Quantity One Two Row 02 04 03 06 04 08 05 10 06 12 07 14 08 16 09 18 10 20 11 22 12 24 13 26 14 28 15 30 Ordering Information 24XX-5XXXTB Pin Quantity See Table One Row 01-40 Two Row Pin Length Dim A 1 = 2 = Tail Dim B One Row Solder Tails Solder Tails Kinked Solder Tails Two Row Solder Tails Solder Tails Kinked Solder Tails Dimension C [ [ [ [ TS-0767-03 Sheet 3 of 3 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373

PDF Datasheet Preview

and Pin Strip Header

Straight & Right Angle, Solder Tail
2400 Series

S One and two row versions

S Straight and right angle versions

S Break to length for faster delivery, lower inventory costs, and faster prototyping

S Tapered tip does not cut the socket wipe during insertion, reducing operational failures and repairs

S Solder standoffs facilitate wash of flux residue, reducing costly rework

S Board pin retention feature available

Physical

Date Modified December 28, 1999

Insulation Material Glass Filled Polyester PBT

Flammability UL 94V-0 Color Gray

Contact Material Copper Alloy

Plating Underplate 100 [ µm ] Nickel QQ-N-290, Class 2 Wiping Area 30 [ µm ] Gold MIL-G-45204, Type II, Grade C Solder Tails 200 [ µm ] 90/10 Tin Lead MIL-P-81728

Electrical

Current Rating 3 A Insulation Resistance > 1 x 109 at 500 Vdc Withstanding Voltage 1000 Vrms at Sea Level

Environmental

Temperature Rating to +105°C

TS-0767-03 Sheet 1 of 3

UL File No. E68080
3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000
For technical, sales or ordering information call 800-225-5373
and Pin Strip Header

Straight & Right Angle, Solder Tail
2400 Series

Straight

See note 1

See Note 1

See Note 2

R Ref [ ]
± [ ]
± [ ]

Pin Cross Section

See Note 2
± Typ [ ]

Recommended Mounting Hole Pattern

Inch [mm]

Tolerance Unless Noted

Inch ± ± ±
[ ] Dimensions for Reference Only

Notes;

This part is molded in the 40 contact quantity version. Parts that require fewer contacts are broken to length. Dimension “C” is measured from a “Molded End” to the “Center of the Break Point” beyond the desired quantity. On Pin Strips, which have break points on both ends, “C” = x contact quantity per row.

The recommended PCB hole size for the kinked tail positions on the solder tail connector is ± Refer to TS-0971 for the number of tails kinked and the position kinked.

Pin Quantity

One Two Row
02 04
03 06
04 08
05 10
06 12
07 14
08 16
09 18
10 20
11 22
12 24
13 26
14 28
15 30
16 32
17 34
18 36
Ordering Information
24XX-6XXXTB

Pin Quantity See Table One Row Two Row

Pin Length

Dim A
1 = 2 =

Tail Dim B

One Row

Two Row

Solder Tails

Solder Tails

Solder Tails

Solder Tails

Kinked Solder Tails Kinked Solder Tails

Dimension C
[ [ [ [

TS-0767-03 Sheet 2 of 3
3M Interconnect Solutions Division
6801 River Place Blvd. Austin, TX 78726-9000
For technical, sales or ordering information call 800-225-5373
and Pin Strip Header

Straight & Right Angle, Solder Tail
2400 Series

Right Angle C

See Note 1

See Note 1
± [ ] B

R Ref
± [ ]
± [ ]

Pin Cross Section
± [ ]
± [ ]

See Note 2

See Note 2
± Typ [ ]

Recommended Mounting Hole

Pattern

Notes This part is molded in the 40 contact quantity version. Parts that require
fewer contacts are broken to length. Dimension “C’’ is measured from a ‘‘Molded End’’ to the ‘‘Center of the Break Point’’ beyond the desired quantity. On Pin Strips, which have break points on both ends, ‘‘C’’ = x contact quantity per row. The recommended PCB hole size for the kinked tail positions on the solder tail connector is ± Refer to for the number of tails kinked and the position kinked.

Inch [mm]

Tolerance Unless Noted

Inch ± ± ±
[ ] Dimensions for Reference only

Pin Quantity

One Two Row
02 04
03 06
04 08
05 10
06 12
07 14
08 16
09 18
10 20
11 22
12 24
13 26
14 28
15 30
Ordering Information
24XX-5XXXTB

Pin Quantity See Table One Row 01-40 Two Row

Pin Length

Dim A
1 = 2 =

Tail Dim B

One Row

Solder Tails Solder Tails Kinked Solder Tails

Two Row

Solder Tails Solder Tails Kinked Solder Tails

Dimension C
[ [ [ [

TS-0767-03 Sheet 3 of 3
3M Interconnect Solutions Division
6801 River Place Blvd. Austin, TX 78726-9000
For technical, sales or ordering information call 800-225-5373

More datasheets: 3AP 100 | 3AP 750 | 3AP 1 | 3AP 250 | DP03A2450TTR/500 | DP03A2450TTR | M3438 SL002 | M3438 SL005 | M3438 SL001 | 5219639F

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 2440-5112TB Datasheet file may be downloaded here without warranties.

Datasheet ID: 2440-5112TB 517629