155216-6302-RB

155216-6302-RB Datasheet


2 mm x 2 mm Straight & Right Angle, Through-Hole, Straight, Surface Mount 1552 Series

Part Datasheet
155216-6302-RB 155216-6302-RB 155216-6302-RB (pdf)
Related Parts Information
155224-2300-RB 155224-2300-RB 155224-2300-RB
155212-6203-RB 155212-6203-RB 155212-6203-RB
155216-5302-RB 155216-5302-RB 155216-5302-RB
155206-6302-RB 155206-6302-RB 155206-6302-RB
155206-6303-RB 155206-6303-RB 155206-6303-RB
155208-6302-RB 155208-6302-RB 155208-6302-RB
155208-6303-RB 155208-6303-RB 155208-6303-RB
155216-6303-RB 155216-6303-RB 155216-6303-RB
155222-6303-RB 155222-6303-RB 155222-6303-RB
155224-6302-RB 155224-6302-RB 155224-6302-RB
155224-6303-RB 155224-6303-RB 155224-6303-RB
155230-6302-RB 155230-6302-RB 155230-6302-RB
155230-6303-RB 155230-6303-RB 155230-6303-RB
155206-5302-RB 155206-5302-RB 155206-5302-RB
155206-5303-RB 155206-5303-RB 155206-5303-RB
155212-2200-RB 155212-2200-RB 155212-2200-RB
155230-5302-RB 155230-5302-RB 155230-5302-RB
155212-5203-RB 155212-5203-RB 155212-5203-RB
155230-2300-RB 155230-2300-RB 155230-2300-RB
155222-2300-RB 155222-2300-RB 155222-2300-RB
155216-2300-RB 155216-2300-RB 155216-2300-RB
155208-2300-RB 155208-2300-RB 155208-2300-RB
155208-5302-RB 155208-5302-RB 155208-5302-RB
155230-5303-RB 155230-5303-RB 155230-5303-RB
155208-5303-RB 155208-5303-RB 155208-5303-RB
155224-5303-RB 155224-5303-RB 155224-5303-RB
155224-5302-RB 155224-5302-RB 155224-5302-RB
155222-5303-RB 155222-5303-RB 155222-5303-RB
155222-5302-RB 155222-5302-RB 155222-5302-RB
155216-5303-RB 155216-5303-RB 155216-5303-RB
155212-6202-RB 155212-6202-RB 155212-6202-RB
155206-2300-RB 155206-2300-RB 155206-2300-RB
155222-6302-RB 155222-6302-RB 155222-6302-RB
PDF Datasheet Preview
3M Latch/Eject Header
2 mm x 2 mm Straight & Right Angle, Through-Hole, Straight, Surface Mount 1552 Series
• 14 pin counts ranging from 6 to 50 positions
• Latch/eject mechanism maintains a secure connection
• Roll pins retain latches to body in shipping and high vibration environments
• Ejector helps make removal of assemblies easy
• Latch design helps resist breakage during eject
• High temperature insulators suitable for “lead free” processing and meet JEDEC J-STD-020C
• Robust system solution when used with 3M IDC Wiremount Sockets or 3M Molded Cable Assemblies
• SMT latch/eject headers are available in tape and reel with vacuum cap for automated replacement
• See Regulatory Information Appendix RIA for chemical compliance information

Date Modified December 10, 2007

TS- 2199-E Sheet 1 of 4

Physical

Insulation Material Glass Filled Polyester PCT

Flammability UL 94V-0 Color Black

Contact Material Copper Alloy
Plating Underplating 50 [ um ] Nickel Wiping Area See Ordering Information Solder Tails 200 [ um ] Matte Tin

Electrical

Current Rating 1 A Insulation Resistance > 1 x 109 Ω at 500 VDC Withstanding Voltage 1000 VRMS at Sea Level

Environmental

Temperature Rating -55°C to +105°C Process Rating Maximum 260°C per J-STD-020C

Moisture Sensitivity Level 1 per J-STD-020C
3 Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M Latch/Eject Header
2 mm x 2 mm Straight & Right Angle, Through-Hole, Straight, Surface Mount 1552 Series

Straight

REF.

REF.

REF.
1552XX-X2XX Latch mating to molded-on socket with
latching ear

See Chart 1 for latch availability.

DIM. "A"

DIM. "D"

POSITION #1 ORIENTATION TRIANGLE

REF.
1552XX-X3XX Latch mating to press-on socket

See Chart 1 for latch availability.

Inch [m ]

Tolerance Unless Noted
inch
[ ] Dim ensions for R eference O nly

DIM. "B"

PC Board Footprint

DIM. "E" [DIM. "E"]

AFTER PLATING

DIM. "B"

Note SeeChart 1 sheet 4 for dimensions A, B, D
Ordering Information
1552XX-6X0X-XX

Contact Quantity See Table

Latching 2 = Latch, molded on skt with latching ear 3 = Latch, press on skt

Note See Chart 1 sheet 4 for latching availability
3 Interconnect Solutions

Solder Tail Length Dimension "E" 2 = [ ] 3 = [ ]

Plating Options:

RB = 30 [ um ] Gold RA = 10 [ um ] Gold

RIA E1 & C1 apply both platings

TS-2199-E Sheet 2 of 4
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M Latch/Eject Header
2 mm x 2 mm Straight & Right Angle, Through-Hole, Straight, Surface Mount 1552 Series

Right Angle

DIM. "A"

POSITION #1 ORIENTATION TRIANGLE

DIM. "D"

DIM. "B"

Inch [m ]

Tolerance Unless Noted
inch [ ] D im ensions for R eference

O nly

DIM. "E" [DIM. "E"]

AFTER PLATING

PC Board Footprint

EDGE OF PCB

DIM. "B"

Notes See straight drawings sheet 2 for latch dimensions. See Chart 1 sheet 4 for dimensions A, B, and D.
Ordering Information
1552XX-5X0X-XX

Contact Quantity See Table

Latching 2 = Latch, molded on skt with latching ear 3 = Latch, press on skt

Note See Chart 1 sheet 4 for latching availability

Solder Tail Length Dimension “E” 2 = [ ] 3 = [ ]

Plating Options:

RB = 30 [ µm ] Gold RA = 10 [ µm ] Gold

RIA E1 & C1 apply both platings

TS-2199-E Sheet 3 of 4
3 Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M Latch/Eject Header
2 mm x 2 mm Straight & Right Angle, Through-Hole, Straight, Surface Mount 1552 Series

DIM. "A" DIM. "D"

Surface Mount Vertical

Inch [m ]

Tolerance Unless Noted
inch [ ] Dim ensions for R eference

O nly

POSITION #1 ORIENTATION TRIANGLE

Chart 1

DIM. "B"

PC Board Footprint

Contact Quantity
6 8 10 12 16 20 22 24 26 30 34 40 44 50

Dim. "A"

Dim "B"

Dim "D"

Latch Availability
2,3 2,3 2,3 2,3 2,3 2,3

Tape Width 44 mm 44 mm 44 mm 44 mm 56 mm 56 mm 56 mm 56 mm 72 mm 72 mm 72 mm 72 mm 88 mm 88 mm

Order Code WD WE WF WH

Notes See straight drawings sheet 2 for latch dimensions. See Chart 1 for applicability. Tape and Reel parts include tape vacuum pick-up cap

Note See straight drawings pg 2 for latch dimensions. Tape & reel parts always supplied with pick ‘n place surface Tray parts supplied without pick ‘n place
Ordering Information
1552XX-2X00-XX-XX

Contact Quantity See Table

Latching 2 = Latch, molded on skt with latching ear 3 = Latch, press on skt

Packaging WX = Tape & reel see table Blank = Trays

Plating Options RB = 30 µ" [ µm ] Gold RA = 10 µ" [ µm ] Gold RIA E1 & C1 apply both platings

TS-2199-E Sheet 4 of 4
3 Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373

Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect

EUROPE Appendix E1 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.

RIA-2217A-c

Appendix E5 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC.

This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

CHINA Appendix C1 China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2 China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below.

RIA-2217A-c

Appendix C3 China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty Limited Remedy Limited Liability.

This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3M Electronics Interconnect Products 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373

Please recycle. Printed in USA. 3M All rights reserved. RIA-2217A-c
3M is a trademark of 3M Company.
More datasheets: AT49BV002N-12JC | AT49BV002-12TI | AT49BV002-12TC | AT49BV002-12JI | AT49BV002-12JC | 13722 | 5112 | 155224-2300-RB | 155212-6203-RB | 155216-5302-RB


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 155216-6302-RB Datasheet file may be downloaded here without warranties.

Datasheet ID: 155216-6302-RB 517312